775753

Domo DO937DV Manual

16
Zoom out
Zoom in
Previous page
1/80
Next page
16
DO937DV
FR
· Installez la poignée.
16
· Après installation, laissez l’appareil reposer pendant 24 heures avant de le mettre sous tension. Le gaz
réfrigérant pourra ainsi se stabiliser.
· Laissez l’appareil fonctionner durant 12 heures sans alimentation électrique an que le boîtier puisse
refroidir à la température appropriée.
· La classe climatique indique la température ambiante minimale et maximale pour le bon
fonctionnement d’un appareil. Vous trouverez la classe climatique sur la plaque signalétique au dos de
l’appareil.
· SN : Subnormal : température ambiante de 10 °C à 32 °C
· N : Normal : température ambiante de 16 °C à 32 °C
· ST : Subtropical : température ambiante de 16 °C à 38 °C
· T : Tropicale : température ambiante de 16 °C à 43 °C
CHANGEMENT DU SENS D’OUVERTURE DE LA PORTE
La porte du congélateur est réversible. Si vous avez besoin de monter la porte du congélateur dans l’autre
sens, il est recommandé d’appeler votre agent d’entretien agréé pour eectuer cette inversion, ou de
demander à un technicien.
Avant d’inverser le sens d’ouverture de la porte, vous devez vous assurer que l’appareil est débranché et
vide.
1. Retirez les deux vis situées à l’arrière du couvercle supérieur.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It's better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
2. Retirez le couvercle supérieur du congélateur.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It's better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO937DV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO937DV in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info