Manual Domo DO9248J (page 68 of 72) (English, German, Dutch, French, Italian, Spanish)

773940

Zoom out

Zoom in

1/72

DO9248J



ZOSTAVENIE

1. Pred skladaním prístroja sa uistite, že je vypnutý a vypojený z el. siete.

2. Motorovú časť postavte na rovné, suché a stabilné miesto.

3. Nádobu otočte hore dnom kde uvidíte malú gumovú časť. Túto doštičku zasuňte na určené miesto

výstupu odšťavených zvyškov.

4. Lisovacie nádobu vložte na blok motora. Nádobu vložte presne na os motora a zaistite, tak aby bola

pevne nasadená.

5. Do nádoby vložte jedno z ltračných sitiek (jemné sitko je čistý džús, sitko s väčšími otvormi slúži

na džús obsahom dužiny, alebo sito na mrazené suroviny. Pozor, mrazené suroviny musia byť pred

lisovaním dostatočne rozmrazené, tak aby sa vidličkou mohlo prepichnúť až do ich stredu).

6. Vložte šnek a ľahkým tlačením zasuňte do tesnenia nádoby a na hriadeľ motora.

7. Nádobu uzavrite vekom a zaistite ho pootočením. Nasledujte symboly “ ”, veko najskôr nasaďte

tak aby obe šípky “ ” smerovali oproti sebe. Následne pootáčajte v smere hodinových ručičiek

pokiaľ šípka neukazuje na symbol zamknutia “ ”. Potom ešte zaistite zatlačením poistného klipu.

Veko musí byť vždy správne nasadené, inak prístroj nejde spustiť.

8. Pod oba otvory (šťavy i odpadu) vložte odmerné nádoby.

9. Otvorte výpust šťavy. Prístroj je takto pripravený.

10. Pre rozoberanie prístroja opakujte tieto kroky v opačnom poradí.

4) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

5) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

6) Assemble the buffer plate well in position

The buffer plate shall be assembled well in the residue outlet after finish cleaning each

time.

ASSEMBLE YOUR SLOW JUICER

1. Put the jar downwards and make sure that the residue outlet shall be placed well in

position. The jar shall be assembled well in position properly otherwise the appliance will

not operate. Besides, before operating, please check the buffer plate and make sure that it

must be assembled well in the residue outlet (See Fig.2).

2. Then select the strainer based on your demand and then put it into the jar. There are

three strainers including juice strainer, jam strainer and frozen dish strainer for your

selection. After it, put the grinding head into the jar and ensure the grinding head is covered

well into the axis of the motor unit (see Fig.3).

NOTE: The three strainers including juice strainer, jam strainer and frozen dish strainer

can not be exchanged with each other when operate. Juice strainer is used for extracting

Fig.2

4) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

5) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

6) Assemble the buffer plate well in position

The buffer plate shall be assembled well in the residue outlet after finish cleaning each

time.

ASSEMBLE YOUR SLOW JUICER

1. Put the jar downwards and make sure that the residue outlet shall be placed well in

position. The jar shall be assembled well in position properly otherwise the appliance will

not operate. Besides, before operating, please check the buffer plate and make sure that it

must be assembled well in the residue outlet (See Fig.2).

2. Then select the strainer based on your demand and then put it into the jar. There are

three strainers including juice strainer, jam strainer and frozen dish strainer for your

selection. After it, put the grinding head into the jar and ensure the grinding head is covered

well into the axis of the motor unit (see Fig.3).

NOTE: The three strainers including juice strainer, jam strainer and frozen dish strainer

can not be exchanged with each other when operate. Juice strainer is used for extracting

Fig.2

4) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

5) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

6) Assemble the buffer plate well in position

The buffer plate shall be assembled well in the residue outlet after finish cleaning each

time.

ASSEMBLE YOUR SLOW JUICER

1. Put the jar downwards and make sure that the residue outlet shall be placed well in

position. The jar shall be assembled well in position properly otherwise the appliance will

not operate. Besides, before operating, please check the buffer plate and make sure that it

must be assembled well in the residue outlet (See Fig.2).

2. Then select the strainer based on your demand and then put it into the jar. There are

three strainers including juice strainer, jam strainer and frozen dish strainer for your

selection. After it, put the grinding head into the jar and ensure the grinding head is covered

well into the axis of the motor unit (see Fig.3).

NOTE: The three strainers including juice strainer, jam strainer and frozen dish strainer

can not be exchanged with each other when operate. Juice strainer is used for extracting

Fig.2

juice, jam strainer is used for making ketchup only while frozen dish strainer is used for

making frozen dish. Select the appropriate strainer based on your demand.

3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then

make the symbol “ ” on the jar lid align with the symbol “ ” on the jar and then rotate

the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the

jar (See Fig.4). After it, press the fastener inwards to lock the jar lid well in position. The

jar lid shall be assembled well in position properly otherwise the appliance will not operate.

Finally, put the food pusher into the jar lid.

Fig.3

Fig.4

juice, jam strainer is used for making ketchup only while frozen dish strainer is used for

making frozen dish. Select the appropriate strainer based on your demand.

3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then

make the symbol “ ” on the jar lid align with the symbol “ ” on the jar and then rotate

the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the

jar (See Fig.4). After it, press the fastener inwards to lock the jar lid well in position. The

jar lid shall be assembled well in position properly otherwise the appliance will not operate.

Finally, put the food pusher into the jar lid.

Fig.3

Fig.4

juice, jam strainer is used for making ketchup only while frozen dish strainer is used for

making frozen dish. Select the appropriate strainer based on your demand.

3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then

make the symbol “ ” on the jar lid align with the symbol “ ” on the jar and then rotate

the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the

jar (See Fig.4). After it, press the fastener inwards to lock the jar lid well in position. The

jar lid shall be assembled well in position properly otherwise the appliance will not operate.

Finally, put the food pusher into the jar lid.

Fig.3

Fig.4

juice, jam strainer is used for making ketchup only while frozen dish strainer is used for

making frozen dish. Select the appropriate strainer based on your demand.

3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then

make the symbol “ ” on the jar lid align with the symbol “ ” on the jar and then rotate

the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the

jar (See Fig.4). After it, press the fastener inwards to lock the jar lid well in position. The

jar lid shall be assembled well in position properly otherwise the appliance will not operate.

Finally, put the food pusher into the jar lid.

Fig.3

Fig.4

juice, jam strainer is used for making ketchup only while frozen dish strainer is used for

making frozen dish. Select the appropriate strainer based on your demand.

3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then

make the symbol “ ” on the jar lid align with the symbol “ ” on the jar and then rotate

the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the

jar (See Fig.4). After it, press the fastener inwards to lock the jar lid well in position. The

jar lid shall be assembled well in position properly otherwise the appliance will not operate.

Finally, put the food pusher into the jar lid.

Fig.3

Fig.4

4. Place your juice container below the juice outlet and residue

container below the residue outlet (see Fig.5). Until now, the

Juicer is ready for operating.

Note: When need to remove the whole appliance, please grasp

the motor unit instead of the jar lid to remove it to avoid

accident.

USING YOUR JUICER

1. Before attaching the power cord into the outlet, make sure the

power switch is in the “O” position, the power switch has three settings: “I” indicates

“ON”, press the power switch to “I” position to activate the motor and start making juice;

“O” indicates “OFF” position, press the power switch to “O” position to turn off the

machine; “R” means reverse rotation, which is only used when something is stuck and you

need to unclog.

2. Make sure the juice container and the residue container are placed in position.

3. Cut fruits and vegetables into smaller pieces. For example, the carrots shall be cut into

thin slices with size of 15mm×15mm before being put into the machine.

NOTE:

A) Please remove any hard seeds before juicing.

B) It is forbidden to process coconuts, sugarcane or similar hard foodstuffs, since this

may damage the motor.

）

）））

It is not recommended to process hard fruit or vegetable rich in fiber and starch.

D) The peel and pits should be removed from oranges, lemons, grapefruits and melons.

4. Drop the prepared fruits or vegetables into the jar lid at an even speed and then let the

Fig.5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO9248J in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Domo DO9248J

Domo DO9248J Manual - English, German, Dutch, French - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info