775819

Domo DO9233TB Manual

17
Zoom out
Zoom in
Previous page
1/28
Next page
17
DO9233TB
www.domo-elektro.be
EN
USE
1. Make sure the hand unit is completely charged.
2. Attach the brush head to the hand unit.
3. Rinse your mouth thoroughly with water and wet the brush head before you brush. You can use
normal toothpaste. To avoid splashing, place the brush head on your teeth before you turn on the
toothbrush.
4. Now move the brush head on the chewing surfaces of your teeth. Move the brush head on the
outside of your teeth and then the inside. Make sure that you brush in the spaces between your
teeth as well as your gums. You do not need to press hard. Clinical tests have shown that the best
cleaning method is by moving the brush head softly from tooth to tooth without exerting pressure.
5. To remove plaque, brush your teeth for at least 2 minutes. This is the recommended time each time
you brush your teeth. The toothbrush has a timer. After 30 seconds, the device will rotate in the
other direction to indicate that you brushed for 30 seconds. This will occur again after 1 minute and
1.5 minutes. After 2 minutes, the toothbrush will stop. If you want to brush some more, press the
on-switch again. The device will work again for 2 minutes.
 Rinse your mouth thoroughly after brushing. The brush changing shape after use is normal. This is


until the appropriate lamp is lit:
· Clean: for daily, thorough brushing of your teeth
· Sensitive: clean your teeth softly and mildly, this is the perfect mode for sensitive teeth
· 
Charging
To maximise the capacity and service life of the rechargeable batteries, the batteries should be fully


1. Insert the plug of the charging cradle into a power socket. The charging cradle can be connected to
any power socket with an output voltage of 100 to 240 Volts.
2. Place the rechargeable hand unit facing forwards in the charging cradle. The red indicator lamp will

that the device is charging.
3. The red lamp turns green when the battery is fully charged.

works.
The hand unit cannot be overloaded. To maintain the optimal capacity of the rechargeable hand unit, it
must be always placed in the charging cradle after use.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO9233TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO9233TB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info