689193
24
Zoom out
Zoom in
Previous page
1/44
Next page
24
DO8146
EN
4. Fasten the small turn screw (D) on the unit.
5. To mount the grill, position the back of the grill on the base. Make sure the handle is
located at the top. Fasten the back of the grill with 4 small black screws.
6. To fasten the fan blades to the fan, turn the protruding pin so that the at side is up.
Fasten the fan blades with a screw.
7. Finally, mount the front of the grill on the fan. Make sure that the clip is at the top and
the opening for the screw is at the bottom. Position the screw in the opening provided
and tighten it with the nut at the back, so that the front and back of the grill t together
correctly. Fasten the halves of the grill together with the clips.
USE
Put the plug in the socket. The button for the speed settings allows
you to turn the fan on and o. There are 3 speeds to choose from (low -
medium - high). To switch the appliance o again, turn the button back
to 0.
OSCILLATION
To allow the fan to oscillate, push in the oscillation button. To stop the fan from oscillating,
pull the button up. When it is switched on, it will alternately turn to left and right to better
spread the air.
DIRECTING THE AIR FLOW
To direct the air ow up or down, loosen the knob for tilting the grill to adjust the direction up
or down. Once the fan is pointed in the right direction, tighten the knob again.
ADJUSTING THE HEIGHT
The height of the fan can be adjusted by loosening the knob and lengthening or shortening
the telescopic tube. Then tighten the knob again. The blocking ring on the tube ensures that
the fan cannot be lowered too far, which would cause the rotation of the fan to be blocked.
CLEANING AND MAINTENANCE
· This fan requires very little maintenance. Never try to repair the fan yourself. If it is
defective, have it checked and/or repaired by a qualied person.
· Prior to assembling the fan or cleaning it, remove the plug from the outlet.
· Keep the rear grill free of dust and other substances in order to allow free circulation of the
air around the motor. Do not disassemble the fan to remove dust from the motor.
· You may clean the exterior of the machine with a soft moist cloth and a mild detergent.
Carefully dry the machine afterwards.
· Never use corrosive or abrasive products to clean the machine.
· Make sure that no water gets into the motor of the machine.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO8146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO8146 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info