775861
27
Zoom out
Zoom in
Previous page
1/36
Next page
DO8132
27
HOW TO USE
To adjust the speed, move the speed control to the required position :
0 : to stop
1 : slow
2 : medium
3 : fast
To make the fan head oscillate, push in the knob on the motor housing. To stop the fan
from oscillation, pull up on the knob.
To adjust vertical angle, tilt fan head up or down as desired.
ASSEMBLY
MONTEER THE ROUND FOOT TO THE TELESCOPIC TUBE:
At the bottom side of the tube is a “L” shaped screw. Losen this screw.
Place the tube in the foot and attache the tub with the “L” shaped screw.
Place the motor unit on the telescopic tube. Remove the large black screw from
the tube and the black screw from the motor unit.
Place the motor on the tube, make sure the small groove, ts in the little hole on
the tube. Now use the large black srew of the tube, to x the motor unit to the
tube. Now use the other black screw, to fully x the motor unit. This last screw
can also be used to tilt the fan.
ASSEMBLY THE FAN TO THE MOTOR UNIT
Remove the small screw at the bottom (1) from the engine part
Take the rear grid (the one with a handle)
Place the grid with the two pins behind on the grid at
the two openings (2) on the engine part
Carefully move the grid down
Secure the grid back onto the engine part by the bot-
tom screw (1)
Push in rmly until the pins protrude through the
holes.
Secure the rear guard to the motor unit with the rear
guard lock nut.
Insert the fan blade onto the motor shaft. Be sure that
the pin in the shaft is match with the slot on the fan
blade. Press rmly until the fan blade stops. Secure the
fan blade with the fan blade screw.
Test the fan blade operation by rotating it with your hand. There should be no fric-
tion with the rear guard lock nut. If the blade does not rotate freely, disassemble
and repeat the procedure.
1
2
2
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO8132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO8132 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info