775800

Domo DO7293S Manual

85
Zoom out
Zoom in
Previous page
1/92
Next page
85
DO7293S
www.domo-elektro.be
SK
Nabíjanie mimo dobíjaciu stanicu
Zapojte adaptér a pripojte konektor do zásuvky vo vysávači
· Symboly pri nabíjaní:
· blikajúce “1111” = prístroj sa nabíja
· svieti symbol “FULL” = prístroj je plne nabitý
· symbol “Erro” = pre nabíjanie musí byť vysávač
zapnutý. Zapnite hlavný vypínač.


Nádobku nečistôt a lter odporúčame čistiť po každom použití, a to nasledujúcim spôsobom:
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if it’s damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if it’s damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if it’s damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if it’s damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if it’s damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
16
Product Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if it’s damaged. The maximum life span of
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps as show in the figures below:
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
B. Take out dust bin.
C. After press down button
and open dust bin upper cover
D. Open dust bin cover and take out the
primary filter and HEPA filter.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
dust bin.
12
34
56
1. Stlačte tlačidlo otvorenia (uvoľnenie) nádoby nečistôt a vyberte ju z vysávača.
2. Otvorte a vyberte lter HEPA (vrátane držiaku).
3. Z nádobky vysypte všetky nečistoty - najlepšie je vysypávať rovno nad smetiaku alebo košom.
4. Následne nádobu a držiak ltra opláchnite pod tečúcou vodou. Nechajte ich uschnúť a potom vložte
späť na svoje miesto. Medzitým vyčistite lter HEPA (vyklepte alebo vyčistite pomocou kefy na
prach)
5. Ak je HEPA lter značne znečistený, môžete ho po cca 30 dňoch používania tiež vyčistiť a premyť
pod tečúcou vodou. Pred vložením späť do vysávača musí byť absolútne suchý.
· Akonáhle je HEPA lter veľa znečistený alebo viditeľne poškodený, tak ho musíte vymeniť za
nový. Maximálna životnosť ltra je približne 6 mesiacov.
· Vymeňte lter HEPA a držiak v nádobe. K tomu najprv otočte kryt na stranu.
6. Pri výmene ltra s držiakom musíte najskôr otvoriť veko nádoby (pootočenie na stranu).
10
Product Operation
Battery Charging
1. Charging Station Placement
A. Place charging station against the wall,
and remove obstacles about 1m on either
sides and 2m in front of the station. Please
remove obstacles as show in the right figure.
B. If robot is power off, switch on the robot first before charging.
2. Charge the robot in either way as shown below:
A. Plug one end of the adapter into the robot and the other end into the power socket as shown
in Fig a.
B. Press the “HOME” button on the remote control or robot to operate the robot looking for the
charging docking automatically as shown in Fig b.
Fig a Fig b
Note:
a. When robot is in charging, the LED panel will gradually show “1111” from left to right.
b. When charging is over, the LED panel will show “FULL”.
c. In standby status, the robot will when the battery level is low.
d. In working status, the robot will look for the charging dock automatically when the battery
level is low.
In Order to Extend Battery’s Life
a. Please charge the robot for up to 5 hours during the first charging.
b. Charge the robot as soon as possible when battery capacity is low.
c. The robot will return to the charging dock automatically when cleaning is finished or battery
capacity is low.
d. When you do not use the robot for some time, please fully charge the battery first, then
switch off the robot and keep it in a cool but dry place.
e. If the robot has been put aside over 3 months, please charge the robot for 5 hours first
before using it for cleaning.
show
… 85 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO7293S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO7293S in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info