775800
81
Zoom out
Zoom in
Previous page
1/92
Next page
81
DO7293S
www.domo-elektro.be
SK

· Do vodiča vložte dve batérie typu AAA.
· Nastavenie času (viac v “nastavenia / nastavenie bez ovládača / harmonogram: čas)
· Pred prvým použitím nechajte prístroj úplne nabiť najmenej 5 hodín (pozri “Použiť/Nabíjanie”).
· Vložte čistiace kefy do vysávača. Kea sa musí stlačiť a stlačiť, až kým nezačujete kliknutie. Sú
označené písmenami L (vľavo) a P (vpravo), dávajte pozor, aby ste ich umiestnili na pravú stranu.
PRÍPRAVA NABÍJACEJ STANICE
1. Umiestnite nabíjaciu stanicu na rovný a stabilný priestor
na podlahu (napr. Dlaždice, lino, parkety atď.), Ktoré ľahko
opierajú o stenu alebo nábytok.
2. Musí byť aspoň 1 meter voľného miesta vľavo a vpravo
okolo stanice. Z prednej strany musí byť dostatok voľného
miesta (najmenej 2 metre - obrázok 1). Ak nie je, vysávač
nemôže nájsť nabíjaciu stanicu.
3. Zapojte nabíjateľnú batériu do sieťovej zásuvky a pripojte
zásuvku k nabíjacej stanici (obrázok 2).
UPOZORNENIE: Kábel adaptéra nesmie byť nikdy obopnutý
okolo nabíjacej stanice, ani nesmie ležať pred ním. V tomto
prípade je kábel navinutý do čistiacich keek vysávača.

Pred použitím alebo nabíjaním musíte vysávač zapnúť hlavným vypínačom na strane.


Vysávač je v pohotovostnom režime, keď je prázdny a hlavný vypínač v zariadení je zapnutý. Vysávač je
pripravený na okamžité použitie.

Ak je vysávač v režime spánku, musíte ho pred spustením najprv aktivovať. Toto sa deje stlačením tlačidla
zapnutia / vypnutia na dotykovej obrazovke alebo tlačidla zapnutia / vypnutia na diaľkovom ovládači.
Režim spánku sa automaticky prepne po 15 minútach pohotovostného režimu. Môžete tiež zapnúť režim
spánku stlačením a podržaním tlačidla na zapnutie / vypnutie na 3 sekundy.

Môžete úplne vypnúť vysávač na boku prístroja, keď je v pohotovostnom režime.
Ak nie je nastavený časovač, po 15 minútach v režime spánku sa prístroj vypne.

· Pre automatické vysávanie jednoducho stlačte tlačidlo on/o. Vysávač navrhne svoju vlastnú cestu tak,
aby zametal celý priestor pozdĺž stien, prekážok alebo schodov.
· Po dokončení sacieho cyklu sa automaticky vráti do nabíjacej stanice. Ak nikde nie je zapojená
nabíjacia stanica, tak sa prístroj automaticky prepne do módu “stand by”
10
Product Operation
Battery Charging
1. Charging Station Placement
A. Place charging station against the wall,
and remove obstacles about 1m on either
sides and 2m in front of the station. Please
remove obstacles as show in the right figure.
B. If robot is power off, switch on the robot first before charging.
2. Charge the robot in either way as shown below:
A. Plug one end of the adapter into the robot and the other end into the power socket as shown
in Fig a.
B. Press the “HOME button on the remote control or robot to operate the robot looking for the
charging docking automatically as shown in Fig b.
Fig a Fig b
Note:
a. When robot is in charging, the LED panel will gradually show “1111 from left to right.
b. When charging is over, the LED panel will show “FULL”.
c. In standby status, the robot will when the battery level is low.
d. In working status, the robot will look for the charging dock automatically when the battery
level is low.
In Order to Extend Battery’s Life
a. Please charge the robot for up to 5 hours during the first charging.
b. Charge the robot as soon as possible when battery capacity is low.
c. The robot will return to the charging dock automatically when cleaning is finished or battery
capacity is low.
d. When you do not use the robot for some time, please fully charge the battery first, then
switch off the robot and keep it in a cool but dry place.
e. If the robot has been put aside over 3 months, please charge the robot for 5 hours first
before using it for cleaning.
show
Fig. 1
10
Product Operation
Battery Charging
1. Charging Station Placement
A. Place charging station against the wall,
and remove obstacles about 1m on either
sides and 2m in front of the station. Please
remove obstacles as show in the right figure.
B. If robot is power off, switch on the robot first before charging.
2. Charge the robot in either way as shown below:
A. Plug one end of the adapter into the robot and the other end into the power socket as shown
in Fig a.
B. Press the “HOME button on the remote control or robot to operate the robot looking for the
charging docking automatically as shown in Fig b.
Fig a Fig b
Note:
a. When robot is in charging, the LED panel will gradually show “1111 from left to right.
b. When charging is over, the LED panel will show “FULL”.
c. In standby status, the robot will when the battery level is low.
d. In working status, the robot will look for the charging dock automatically when the battery
level is low.
In Order to Extend Battery’s Life
a. Please charge the robot for up to 5 hours during the first charging.
b. Charge the robot as soon as possible when battery capacity is low.
c. The robot will return to the charging dock automatically when cleaning is finished or battery
capacity is low.
d. When you do not use the robot for some time, please fully charge the battery first, then
switch off the robot and keep it in a cool but dry place.
e. If the robot has been put aside over 3 months, please charge the robot for 5 hours first
before using it for cleaning.
show
Fig. 2
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO7293S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO7293S in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info