738962
24
Zoom out
Zoom in
Previous page
1/52
Next page
24
DO715K
EN
USE WITH COLLECTION RESERVOIR
1. Remove the lid from the bean reservoir. Place the desired amount of beans in the reservoir. Make
sure not to exceed the ‘max.’ indication (± 250 g). Put the lid back on the bean reservoir.
2. Set the grinding control to the desired coarseness. You need to set this before turning on the device.
Turn the grinding control to the right for coarsely ground coee. The coarsest grind is indicated by
10. Turn the grinding control to the left for nely ground coee. The nest grind is indicated by 1.
3. Plug the power cord into a socket. All indicator lights ash three times.
4. The amount of ground coee is determined by the duration of grinding. You can adjust the time, and
therefore the dosage, with the increase and decrease buttons on the control panel. The indicator
lights illuminate. The amount of coee grounds corresponding to the set times depends on the type
of bean and the selected coarseness.
Icon
Time - 10 sec 20 sec 30 sec 40 sec 50 sec
5. Press the on/o button to start grinding. The coee grinder stops automatically when the selected
time setting has elapsed. If you want to stop the grinding manually, press the on/o button again.
! Attention: when the collection reservoir is full, you must switch o the appliance and empty the
reservoir before further grinding.
USE WITH PORTAFILTER ACCESSORY
1. Remove the reservoir lid. Place the desired amount of beans in the
reservoir. Make sure not to exceed the ‘max.’ indication (± 250 g). Put the
lid back on the bean reservoir.
2. Set the grinding control to the desired coarseness. You need to set this
before turning on the device. Turn the grinding control to the left for
coarsely ground coee. The coarsest grind is indicated by 1. Turn the
grinding control to the right for nely ground coee. The nest grind is
indicated by 10.
3. Plug the power cord into a socket. All indicator lights ash three times.
4. Mount the portalter accessory on the appliance.
5. Press the portalter of your espresso machine against the accessory. The
appliance will start grinding and the indicator light will illuminate.
6. When you have the desired amount of coee grounds in the portalter,
remove the lter from the accessory. The appliance stops grinding.
NOTES:
· The appliance enters sleep mode when there is no activity for 90 seconds. Press any button to
reactivate the appliance.
· During operation, you can stop grinding manually at any time by pressing the on/o button.
· It is recommended to use the appliance in one continuous period for a maximum of 90 seconds. If you
still use the device continuously for 3 minutes, let it rest for 30 minutes.
· The maximum capacity of the collection reservoir is ± 130 g. Make sure this is not exceeded. Empty the
reservoir before further grinding.
4
5
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO715K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO715K in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info