775781

Domo DO7109S Manual

25
Zoom out
Zoom in
Previous page
1/52
Next page
25
DO7109S
www.domo-elektro.be
EN
USE
This steam generator oers 2 options: dry ironing or steam ironing. Follow the instructions below. Also
carefully read the ironing tips at the end of this section before using the appliance.
DRY IRONING
1. Place the iron on the thermal insulation pads of the steam generator.
2. Put the plug into the outlet and press the on/o button. The
indication light of the on/o button will start ashing.
3. Select the desired temperature with the temperature dial, according
to the kind of fabric that needs to be ironed. The temperature
indication light will start ashing and the iron will start warming up.
4. When the temperature indication light stays on, the selected
temperature has been reached. You can now start ironing.
Caution: Never touch the hot soleplate!
STEAM IRONING
Caution: do not plug in the appliance yet at this point.
1. Open the lling cap and ll the water tank with water. Make sure that you do not exceed the
maximum level (2 L). Use only mains water or 50 % mains water and 50 % de-mineralised water if
you have hard water.
2. Close the lling opening.
3. Put the plug into the outlet and press the on/o button. Set the
temperature dial to the desired temperature, according to the kind of
fabric. The temperature indication light and the indication light of the
on/o button will continue ashing.
4. The water in the water reservoir will heat up. When the temperature
indication light stays on, the appliance has reached the right
temperature. When the indication light of the on/o button stays on,
you can iron with steam.
5. To iron with steam, press the steam button on the inside of the iron’s
handle. A continuous ow of steam will come out of the sole. When you release the button, you will
iron dry, without steam.
6. Use a steam boost to get rid of stubborn wrinkles. Press the steam button twice in rapid succession.
There is a 15-second wait in order to use the steam boost a 2nd time. Please note: the steam amount
must be set to medium or high.
Please note:
· Do not touch the hot sole of the iron!
· Never aim steam at people!
7. Press the ECO button to iron on a lower steam level. The indication light of this
button will light up to indicate this function is in use.
8. After ironing, press the on/o button and the appliance will switch o. All indication lights will go
out. Disconnect the plug from the socket. Let the appliance cool down completely. When the steam
button or the buttons on the control panel are not being used for 10 minutes, the indication lights
will start ashing. If you press a button during that time, the iron will keep its temperature. If you do
not have pressed a button during 30 minutes, the appliance will switch o automatically. This is a
safety precaution in case you forget to turn o the appliance.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO7109S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO7109S in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info