775652

Domo DO336L Manual

34
Zoom out
Zoom in
Previous page
1/80
Next page
34
DO336L
EN
· The appliance works only with the lm supplied with it. The lm is also available as a separate item for
this appliance. Do not use other lms or bags in this machine.
MAKING BAGS WITH THE FILM ROLL
The lm roll allows you to make bags yourself according to the size of the food that you want to package.
1. Put the plug in the socket. Open the lid.
2. Ensure that the cutting blade is positioned at the far left or far right
of the cutting edge. Raise the cutting edge.
3. Roll the lm out to the required length. Lower the cutting edge and
cut the roll using the cutting blade.
4. Make sure that the lm is clean and has no folds in it.
5. Place one open end of the lm on the heating strip.
! PLEASE NOTE: Do not allow the lm to get into the vacuum
chamber.
6. Press the lid down using the handle so that it clicks shut. The display
will show a ‘0’. The lid is now closed.
7. Press the Manual Seal button to switch on the machine and to
seal the lm at one end. The Manual Seal light comes on and the
numbers on the display count down. When the light goes o, the bag
is ready to use.
SEALING A BAG USING THE VAC&SEAL BUTTON
1. Put the plug in the socket.
2. Place the food you want to store in the bag. Open the lid.
3. Place the open end of the bag in the vacuum chamber, without
covering the air inlet. Make sure that the end of the bag that rests of
the sealing strip is completely clean and free of food particles. The
bag must be kept tight, without any folds in it.
4. Press the lid down using the handle so that it clicks shut.
5. Select the weld time using the Sealing button. Set the pressure with
the Pressure button.
6. Press on the Vac&Seal button to start the machine. The machine
will now automatically vacuum seal. The Vac&Seal button light will rst come on. The numbers on
the display count down. The Manual Seal lamp will then also light up, indicating that the bag in now
being sealed. When sealing is complete, the indicator lamps will switch o again. The display will
show a ‘0’.
7. Open the lid and check whether the bag is sealed properly.
SEALING IN A BAG USING THE PULSE VACUUM BUTTON
1. Put the plug in the socket.
2. Place the food you want to store in the bag. Open the lid.
3. Place the open end of the bag in the vacuum chamber, without covering the air inlet. Make sure that
the end of the bag that rests of the sealing strip is completely clean and free of food particles. The
bag must be kept tight, without any folds in it.
4. Press the lid down using the handle so that it clicks shut.
5. Select the weld time using the Sealing button. Set the pressure with the Pressure button.
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO336L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO336L in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info