478456

Domo DO 7074 S Manual

31
Zoom out
Zoom in
Previous page
1/38
Next page
DO7074S
performance)
2. Connect the appliance into suitable socket outlet. Press the power switch at base
control panel until Power indicator light turn ON to show the connection of the power
supply. Heating indicator light ON indicates steam chamber being heated up. Dur-
ing use, heating indicator light will cycle from ON to OFF and then OFF to ON, This
shows that steam chamber automatically keep temperature constant.
3. Set temperature control dial at the steam ironing setting. Heating indicator light will
turn on to indicate the iron being heated up, It will go out when the required tempera-
ture is reached. It also indicates that the unit is ready for use. During use, it is normal
that the temperature indicator light will cycle from ON to OFF and then OFF to ON
automatically.
4. Before every rst use, it is proposed that the iron will be cleaned as following pro-
cedure: Select adjustable steam knob to Max steam setting, hold the iron and press the
steam switch underneath the handle for 20 seconds, and then release for 30 seconds,
do this for two cycles. When heating indicator light OFF, it is ready for ironing.
5. During steam ironing, adjust steam rate according to requirements based on above
steam function setting.
6. After use, set the temperature control dial to “MIN” position, and place the iron
back on the iron rest plate. Switch off the unit by pressing the power switch and then
unplug the appliance from the outlet.
7. Slide out the water tank and pour out the remaining water.
NOTES:
a. For every rst time use, it is normal that a slightly vibration sound may be oc-
curred from electrical pump inside the base unit for a few seconds when steam ironing
started. It is because the water has been being just pumped into the heating chamber. If
this abnormal conditions continuously happen for more than 30 seconds, please check
whether water tank and lter assembled correctly or not.
b. Every rst time use, please set adjustable steam knob to Max position to allow
steam escape quickly.
DRY IRONING
1. Connect the appliance to a suitable socket outlet. Press the power switch at base
control panel until heating indicator light turn ON to show the connection of the power
supply. Set steam adjustable knob to Min to dry ironing.
2. Set temperature control dial at the iron until desired temperature indicator light,
light up to indicate the iron being heated up according to above fabric setting chart.
Temperature indicator light will go out when the required temperature is reached.
The temperature indicator will cycle from ON to OFF and then OFF to ON automati-
cally, during use, do not press down steam switch.
3. After use, set the Temperature control dial to “MIN” position, and place the iron
back on the iron rest plate. Switch off the unit by pressing the power switch and then
unplug the appliance from the outlet.
31
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO 7074 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO 7074 S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info