478456
28
Zoom out
Zoom in
Previous page
1/38
Next page
DO7074S
IMPORTANT SAFEGUARDS
Make sure to read all the safety precautions below and look at the illustrations before
you start using the appliance.
1. Read all instructions carefully before using.
2. Use the appliance for its intended use only.
3. The appliance is intended for household use only.
4. To protect against the risk of electric shock, do not immerse the iron and main base
into water or any other liquids.
5. Connect the appliance only to an alternating current of the voltage specied on the
rating plate and only to an earthed main socket.
6. The appliance should always be turned to OFF before plugging or unplugging from
outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to dis-
connect.
7. Do not allow power cord or supply hose to touch hot surface.
8. Always disconnect the plug of the appliance from the main socket when lling with
water or emptying and when not in use.
9. Do not operate the appliance with a damaged cord or if the appliance has been
dropped or damaged. To avoid a hazard such as the risk of electric shock, do not disas-
semble the appliance, it must be taken to a qualied serviceman or manufacturer or its
service agent for examination and repair.
Incorrect re-assembly can cause a risk of electric shock when the iron is used.
10. Place the iron out of the reach of children, close supervision is necessary for any
appliance being used by or near children. Do not leave the iron unattended while con-
nected to the supply mains.
11. Always place the iron on the iron rest plate horizontally. Do not put the hot iron
onto the power cord or the supply hose.
12. Use and place the appliance on a stable, level and horizontal surface or ironing
board.
13. Burns can occur from touching hot metal parts, hot water or steam. Use caution
when using the appliance. If the iron is placed onto the iron rest plate during in use,
the iron rest plate may become a hot surface. Do not touch the iron rest plate and the
sole-plate until they have cooled down
completely.
14. Never use the iron facing towards the people because the steam can cause burns.
15. Never wind the supply hose during use.
16. To avoid a circuit overload, do not operate another high wattage appliance in the
same circuit
17. If an extension cord is absolutely necessary, a 15-ampere cord should be used.
Cords rated for a lower amperage may overheat, care should be taken to ensure that
the cord cannot be accidentally pulled or tripped over.
18. The iron must not left unattended while it is connected to the supply mains.
19. When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO 7074 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO 7074 S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info