112439

Domo DO 7046 S Manual

28
Zoom out
Zoom in
Previous page
1/31
Next page
DO-7046S
SELF-CLEANING
This function removes the scales and minerals built up in the steam chamber. The iron
will remain in the best condition if this function is performed at least once a month or
more regularly, depending on the hardness of the water used.
1. Fill the iron as described in “How to fill with water”. Fill the watertank up to half.
2. Place the iron on a surface in upright standing position.
3. Connect to a mains supply outlet.
4. Select the “Max” temperature setting.
5. The indicator light will flash as long as the temperature is too high or too low.
6. When the required temperature is reached the indicator light will stop flashing and
you will hear a “beep” sound. The iron is now ready for use.
7. Disconnect the iron from mains supply outlet.
8. Hold the iron horizontally over a sink.
9. Pull and hold the steam control/self-cleaning knob completely to the right and hold
it there.
10. Steam and boiling water will drain from the holes on the soleplate washing away
the scales and minerals that have built up inside the steam chamber.
11. Gently move the iron back and forth until the watertank is empty.
12. When the self-cleaning has been completed, release the steam control/self-cleaning
knob.
13. Rest your steam iron back on its heel rest and allow it to fully cool down.
14. Wipe the soleplate with a cold damp cloth.
Caution: keep skin/body away from the hot water.
ANTI-DRIP
1. Your iron has an anti-drip system, which is designed to prevent that water escapes
from the soleplate when the iron is too cold.
2. During use, the anti-drip system may emit a loud clicking sound, particularly during
heat-up or whilst cooling down. This is perfectly normal and indicates that the system
is functioning correctly.
AUTO SHUT-OFF
The auto shut-off feature will operate after 3 minutes when the iron is not moving.
By simply moving the iron, the auto shut-off will reset (auto shut-off indicator goes
off).
Note: after auto shut-off is reset, the iron will take about 60 seconds to reach its
previous soleplate temperature set by the temperature dial.
28
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO 7046 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO 7046 S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info