112408

Domo DO 315 IP Manual

19
Zoom out
Zoom in
Previous page
1/22
Next page
DO315IP
edges and/or hot surfaces.
Commissioning the device
Prior to connecting the device, check whether the voltage indicated on the type plate
corresponds to the voltage supply in your home. A wrong connection may lead to
grave damage on the device and injury to persons.
The hotplate’s surface consists of temperature-resistant ceramics. In case of damage,
even if this concern only a small tear, disconnect the device from the power supply
immediately and contact the customer service.
We recommend not placing any metal kitchen utensils, cookware or pan lids, knives or
other metal objects on the hotplate. These may heat up when the device is turned on.
Do not place any magnetically objects like credit cards, cassettes etc. on the glass
surface while the device is in operation.
On order to avoid overheating, do not place any aluminium foil or metal plates on the
device.
Do not insert any objects like wires or tools into the ventilation slots. Attention: this
may cause electric shocks.
Do not touch the hot surface of the ceramic fi eld. Please note: the induction hotplate
does not heat up itself during cooking, but the temperature of the cookware heats up
the hotplate!
Do not heat up any unopened tins on the induction hotplate. A heated tin could
explode; therefore remove the lid under all circumstances beforehand.
Scientifi c tests have proven that induction hotplates do not pose a risk. However,
persons with a pacemaker should keep a minimum distance of 60 cm to the device
while it is in operation.
OPERATING THE DEVICE
Plug the power plug into a suitable outlet.
The control lamp of the ON/OFF switch lights up and an acoustic signal sounds.
Now the device is in standby mode.
Place suitable cookware in the centre of the hotplate.
Now press the ON/OFF switch once to turn the induction hotplate on. The control
lamps of “HEAT” blinks and an acoustic signal sounds. (NOTE: should no further
operation in 30 seconds after pressing ON/OFF key, the control lamp of HEAT in
the display goes off and then the unit goes back to standby status automatically. To
reoperate the unit, simply press ON/OFF key and other function keys).
Press the Function Key HEAT. The preset power stage “5” is selected and the device
turns on.
With the knob, you can change the settings at any time in a range from 1 – 10.
Press the Function Key TEMP. to select the temperature. The preset temperature stage
“120°C” is selected and the device turns on.
With the knob, you can change the settings at any time in a range from 60 – 240°C.
(Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C)
Timer Function. After the selection of the temperature mode press the but key TIMER
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO 315 IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO 315 IP in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info