Manual Domo b3975 (page 55 of 60) (English, German, Dutch, French)

379789

Zoom out

Zoom in

1/60

B3975

THE CENTRE OF THE BREAD IS NOT SUFFICIENTLY BAKED

This may be due to the type of ﬂ our you used, often too heavy varieties such as rye

ﬂ our or wholemeal ﬂ our. Try to program an extra kneading process when using these

types of ﬂ our. As soon as the bread maker has terminated the ﬁ rst kneading process,

you press stop. Next, you reprogram the bread maker and press start: the appliance

will start kneading again, a larger quantity of air has now been absorbed by the dough.

You could also try selecting the dark crust colour, because this slightly increases the

baking temperature.

THE BREAD HAS RISEN TOO MUCH

If your bread rises higher than it ought to, you have used too much yeast. Please check

whether you have used the right quantity and the right type of yeast. Too much sugar

can over activate the yeast.

Try reducing the dose of sugar and do not use too much dried fruits or honey, which

equally contain a lot of sugar. Try using 10 to 20 ml less water. Do bear in mind that a

lower degree of humidity could brake the activity of the yeast. Sometimes over-rising

can also be caused by ﬂ our that was grinded too ﬁ ne. These varieties of ﬂ our do not

require an equally active yeast as heavier varieties do.

THE BREAD IS TOO DRY

Try using less ﬂ our or add a tablespoonful of liquid. While your bread maker is

kneading fairly heavy dough or when you have programmed longer kneading times,

the appliance may occasionally tremble a bit. Therefore you must make sure your

bread maker is always positioned on a stable surface, not too near to another object

and not too close to the edge of the kitchen sink unit.

THE BREAD IS FLAT

If you are using grinded ﬂ our or wholemeal ﬂ our, your bread tends to be somewhat

ﬂ atter. If your bread does not rise at all, you need to check the yeast. Have you thought

of adding the yeast? If the bread has only risen a little bit, the yeast you used may have

been too old. Too hot or too cold water also brakes the yeast’s activity. Please also

verify whether you have not

used too much salt.

ERROR ON THE DISPLAY

If you see the indication “H:HH” appearing on the display after you have pressed the

start button, this means that your bread maker has not sufﬁ ciently cooled down yet. It

is necessary to allow your appliance to cool down for another 10 to 20 minutes, with

its lid open. If the error “E:EE” appears on the display after you have pressed the start

button, your bread maker needs to be serviced by a qualiﬁ ed technician. Please contact

your store.

FREQUENTLY ASKED QUESTIONS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Domo b3975 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Domo b3975 Manual

Product: