517881
39
Zoom out
Zoom in
Previous page
1/528
Next page
TEC 40D
- 41 -
GB
Use, maintenance and installation instructions
FINDING MALFUNCTIONS
The aim of the following information is to help identify and correct any malfunctions and
problems that might occur during use. Some of these problems may be solved by the user,
while for all the others specic technical knowledge or abilities are required, so that they
must only be carried out by qualied technicians of proven experience in the specic eld
of operation.
If the problem or fault found is not included in the irregularities noted in the table, consult
the “Alarm messages” paragraph.
Table 6: Operation failures
Problem Cause Remedy
When the starter
button is pressed the
control panel does not
light up
Main fuse damaged
Replace fuse (See
“Replacement of fuses”)
Battery low Change the battery
The power cables are
disconnected or they do not
provide a continuous supply
Contact the service
department
When the starter
button is pressed the
unit does not start
Safety switch in pos. 0
Press safety switch in order
to enable the power supply
of the equipment.
Battery low Change the battery
The power cables are
disconnected or they do not
provide a continuous supply
Contact the service
department
The internal control panel parts
have failed
Contact the service
department
The starter motor does not turn
Contact the service
department
The starter motor
turns, but the unit
does not start
Fuel level too low Fill up with fuel
The power cables are
disconnected or they do not
provide a continuous supply
Contact the service
department
The inverter is broken
Contact the service
department
TROUBLESHOOTING INFORMATION
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dometic TEC40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dometic TEC40 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 62,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info