517881

Dometic TEC40 Manual

13
Zoom out
Zoom in
Previous page
1/528
Next page
TEC 40D
- 15 -
GB
Use, maintenance and installation instructions
– Even after adequate documentation, simulate a few test operations on rst use, if
necessary, so as to identify the various controls and their main functions, in particular
those relating to start-up and stoppage.
– Check the general conditions of the equipment before every use to prevent accidents or
damage to the motor.
– Set up and carry out equipment installation only in areas or locations which are
appropriately ventilated, to maintain adequate efciency conditions and to avoid the risk
of re.
– During normal operation, set the equipment up in a place that is not easily accessible by
people, to avoid potential injury (burns, injuries, etc.) to the health and safety of people
or animals.
– If the equipment is installed in a vehicle, avoid braking sharply or accelerating suddenly
because this could create problems for the pumping system and consequently shut down
the motor.
– Only use the unit for the purposes foreseen by the manufacturer. Improper use of the
unit may result in risks for the health and safety of persons, and in damage to property.
– The appliance has been designed and built to satisfy all the working conditions indicated
by the manufacturer. Tampering with any of the devices in order to achieve performance
levels other than the ones foreseen may result in risks for the health and safety of persons,
and in damage to property.
– Do not use the unit if the safety devices are not properly installed and operating correctly.
Failure to comply with this requirement may result in severe risks for the health and safety
of persons.
– Use the equipment only and exclusively with the door appropriately closed. Do not touch
the equipment and/or electric connections with wet hands.
– After each use, before shutting down the equipment, allow it to work idly (with services
deactivated) for a few minutes.
– Always ensure that the motor is shut down and the equipment is in a well-ventilated area
before relling with fuel. Diesel is highly ammable.
– Do not excessively ll the tank (there should not be fuel in the terminal part). When relling
is complete, close the cap well.
– Do not allow the equipment’s motor to function in closed or insufciently ventilated
environments.
– The exhaust fumes contain carbon monoxide (an odourless and colourless poisonous
gas) which could cause serious harm to people’s health (even death).
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dometic TEC40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dometic TEC40 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 62,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info