25
4.16.4 Making ice cubes
Ice cubes are best frozen overnight. At night,
the refrigerator has less work to do and the
unit has more reserves.
Only use drinking water!
WARNING!
Refrigerator operation
4.18 Defrosting
As time goes by, frost builds up on the fins
inside the refrigerator. A layer of frost thicker
on one side may occur and does not represent
a malfunction. When this layer of frost is about
3 mm (0.118 inches) thick, the refrigerator
should be defrosted.
n Switch off the refrigerator, as described in
section
Shutting of the refrigerator
.
n Remove all food and the ice cube tray.
n Leave the refrigerator door open to allow air
to enter and to prevent formation of mildew.
n After defrosting (freezer compartment and
fins free of frost), wipe both cooling com-
partments dry with a cloth.
4.17 Shutting off the refrigerator
n For battery igniter models, set energy
selector switch (1) to position "OFF". The
appliance is switched off (Fig. 40).
n Switch off MES and AES models by
pressing button (2). Keep button (2) pres-
sed for 3 seconds. The display disappears
Fig. 40
Fig. 41
Fig. 42
Fig. 43
2
1
and the appliance is fully switched off (Fig.
40).
n Release the locking mechanism of the door
lock by pushing it and shift it to the front. If
the door is shut in this position, a small gap
is nevertheless kept open to prevent forma-
tion of mildew.
n If the refrigerator is to be taken out of ser-
vice for an extended period of time, close
the onboard shut-off valve and the cylinder
valve .
1. Fill the ice cube tray
with drinking water.
2. Place the ice cube
tray in the freezer
compartment.
Fig. 39
Fig. 38
Note: Water thawing in the main compartment
of the refrigerator runs into an appropriate
container at the back of the refrigerator. From
there, the water evaporates. Place a cloth in
the freezer compartment and in the cooling
compartment to collect excess water before
defrosting.
The layer of ice must never be removed
forcibly, nor may defrosting be accelera-
ted using a heat source!
CAUTION!
