Manual Dometic RML9430 (page 18 of 88) (English, German, Dutch, French)

750553

Zoom out

Zoom in

1/88

Installing the refrigerator RML9xxx

•The refrigerator must be installed so that it is easily accessible for service work,

easy to de-install and install and can be easily removed from the vehicle.

•The distance between the refrigerator and the rear wall must be min. 15 mm –

max. 25 mm (fig. 5, page 5).

•The refrigerator must be installed in a recess so that it stands firm when the vehicle

is in motion. Note the following dimensions here (H x W x D in mm):

–RML9330/9331/9335: 1293 x 420 x 586.5 (fig. 1, page 3)

–RML9430/9431/9435: 1293 x 468 x 553 (fig. 2, page 3)

•The outer wall must be fitted with an air inlet vent (fig. 31, page 4) and an outlet

vent (fig. 32, page 4) with ventilation grilles so that the heat generated can be

easily released to the outside:

– Air inlet vent: Fit the ventilation grille as flush as possible to the floor of the

installation niche with a minimum cross-section of 500 cm2.

– Outlet vent: fit as far above the refrigerator as possible.

– The distance between the air inlet and outlet vents must be at least 1050 mm

(fig. 4, page 4).

•Fit a heat conduction plate (fig. 33, page 4) above the refrigerator so that the

heat does not accumulate in the vehicle.

•If the ventilation grille of the air inlet vent cannot be installed flush to the ground,

an additional inlet vent (fig. 34, page 4) must be provided in the floor for

releasing leaked gas.

•A distance of more than 25 mm between the refrigerator and rear wall leads to

poor performance and increases the power consumption of the refrigerator.

Reduce the space behind the refrigerator to create adequate air inlet and outlet

ventilation (fig. 5, page 5). Use a ventilation plate, for example, to do this.

•If the minimum distance between the air inlet and outlet vents cannot be met, a

roof vent must be installed instead of the air outlet vent.

– The roof vent should be installed directly above the back of the refrigerator as

far as this is possible. Use an air duct (fig. 61, page 5) if you need to install

the roof vent offset, otherwise heat will accumulate there.

– The distance between the air inlet vent and the roof vent must be at least

1350 mm (fig. 6, page 5).

– If a roof air conditioner is provided, the distance between the roof vent

(fig. 71, page 6) and the air outlet of the roof air conditioner (fig. 72,

page 6) must be at least 300 mm.

•The refrigerator must not be installed at the side of the air inlet and outlet vents as

this leads to poor performance and increases the power consumption of the

refrigerator.

•The air inlet and outlet vents must not be covered by vehicle parts (such as an

open door or by installing accessories such as bicycle racks) while operating.

RML9xxx-I-West.book Seite 18 Donnerstag, 7. Dezember 2017 11:24 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dometic RML9430 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dometic RML9430

Dometic RML9430 User Manual - English, German, Dutch - 124 pages

Dometic RML9430 User Manual - Dutch - 40 pages

Dometic RML9430 User Manual - French - 124 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dometic RML9430 Manual

Product: