610411
18
Zoom out
Zoom in
Previous page
1/328
Next page
EN
Connecting the refrigerator RM122, RM123
18
7.8 Changing door decor
A
You can change the door decor. The door decor can consist of stainless
metal or plastic laminate and must have the following dimensions:
485 x 350 x 0.5 – 3 (H x W x D in mm).
Proceed as follows to change the door decor:
Turn the refrigerator on the side.
Remove the three screws on the bottom of the door frame.
Pull out the decor.
Slide the new decor into the opening.
Screw the three screws back in.
Wait a few hours before starting the refrigerator.
8 Connecting the refrigerator
8.1 Connecting igniter (RM123 only)
Use a cable with a diameter of 0.5 mm² and a fuse with 0.5 or 1 A.
Connect the terminal block of the igniter with the plus and minus pole of
the battery (fig. b 1, page 5).
8.2 Connecting to 12 Vg
the device is connected with a 12-V-plug to a 12-V-socket
Connect the refrigerator as shown in fig. c, page 6.
Fit a suitable fuse to the control cable.
Connect the control cable to the connected positive terminal (terminal 15).
Install a relay between refrigerator and battery to prevent the battery is
completely discharged accidentally when the engine is switched off.
NOTICE! Risk of damage
Lay the refrigerator on the side only, never on the backside.
Otherwise the aggregate may be damaged.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dometic RM123 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dometic RM123 in the language / languages: All languages as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info