750599
19
Zoom out
Zoom in
Previous page
1/296
Next page
EN
RM10.5(S)(T), RMS10.5(X)(S)(T) Installing the refrigerator
19
The outer wall must be fitted with an air inlet vent (fig. 31, page 4) and an outlet
vent (fig. 32, page 4) with ventilation grills so that the heat generated can be
easily released to the outside:
Air inlet vent: Fit ventilation grill as flush as possible with the base of the instal-
lation niche.
Outlet vent: fit as far above the refrigerator as possible.
The distance between the air inlet and outlet vents must be at least 1050 mm
(fig. 4, page 4).
Fit a heat conduction plate (fig. 41, page 4) above the refrigerator so that the
heat does not accumulate in the vehicle.
The distance between the refrigerator and the rear wall must be at least 15 mm
but no more than 25 mm.
A distance of more than 25 mm between the refrigerator and rear wall leads to
poor performance and increases the power consumption of the refrigerator.
Reduce the space behind the refrigerator to create adequate air inlet and outlet
ventilation (fig. 5, page 5). Use a ventilation plate, for example, to do this.
If the minimum distance between the air inlet and outlet vents cannot be met, a
roof vent must be installed instead of the air outlet vent.
The roof vent should be installed directly above the back of the refrigerator as
far as this is possible. Use an air duct (fig. 61, page 5) if you need to install
the roof vent offset; otherwise, heat will accumulate there.
The distance between the air inlet vent and the roof vent must be at least
900 mm (fig. 6, page 5).
If a roof air conditioner is provided, the distance between the roof vent
(fig. 71, page 6) and the air outlet of the roof air conditioner (fig. 72,
page 6) must be at least 300 mm.
The refrigerator must not be installed at the side of the air inlet and outlet vents as
this leads to poor performance and increases the power consumption of the
refrigerator.
The air inlet and outlet vents must not be covered by vehicle parts (such as an
open door or by installing accessories such as bicycle racks) while operating.
Install the refrigerator so that it is protected from excessive heat, as this leads to
poor performance and increases the power consumption of the refrigerator.
The refrigerator must be installed in a draft-proof location.
RM10_RMS10-I-EMEA18.book Seite 19 Mittwoch, 29. April 2020 7:31 07
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dometic RM10.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dometic RM10.5 in the language / languages: All languages as an attachment in your email.

The manual is 9,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dometic RM10.5

Dometic RM10.5 User Manual - All languages - 452 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info