783769
20
Zoom out
Zoom in
Previous page
1/271
Next page
20 4445103123
Using the wine refrigerator Wine Refrigerators
EN
7.8 Switching to Sabbath mode
In Sabbath mode, the display, interior lighting and warning signal for the temperature monitor are deactivated. When the Sab-
bath mode is activated, it switches o automatically aer 96 hours. The refrigeration continues as usual.
Press both the on/o button and the light button for at least 5 seconds.
9 The temperature indicator ashes 4times.
9 The Sabbath mode is activated respectively deactivated.
7.9 Setting the temperature
The temperature of each temperature zone can be set between 5 °C and 20 °C (41 °F and 68 °F).
To avoid food waste, note the following:
Adjust the temperature to the quantity and type of the foodstu.
Store the dierent foodstu types as shown in the gures.
NOTE:
If the temperature zones are one above the other, the temperature for the lower zone must always be just as high
or higher than the temperature for the upper zone.
The wine refrigerator functions at its best if the dierence in temperature between the two zones is at least 4 °C
(39 °F).
1. Display the set temperature by briey pressing the up button or the down button (g. and , on page 12).
2. If your wine refrigerator has two temperature zones, set the temperature for each zone separately by using the correspond-
ing up button and down button . Briey press the up button to increase the temperature or the down button
to decrease the temperature.
9 The display ashes while you make the setting.
9 Once you have set the temperature, the display shows the current inner temperature again.
7.9.1 Setting the temperature unit (°C or °F)
You can select whether the temperature is displayed in Celsius or Fahrenheit.
Press the light button for at least 5seconds.
9 The display shows the temperature in the other unit.
7.9.2 Displaying the set temperature
NOTE:
When using the wine refrigerator for the rst time or if it has not been used for a long time, the inner temperature
could dier from the one you have set. The temperature display ashes as long as this is the case. Once the set
temperature has been reached, the temperature display lights up constantly.
Press the up button or the down button briey.
9 The display shows the set temperature.
9 Aer 5seconds the display shows the current inner temperature again.
7.9.3 Switching the fan on/o (dynamic cooling mode or silent mode)
The fan can be operate in two dierent modes:
Silent mode: The fan runs only when required. The fan switches o when the set temperature is reached.
Dynamic cooling mode: The fan runs permanently to regulate humidity and temperature. This way an homogeneous cli-
mate for the interior of a temperature zone is reached.
Silent mode
Press the up button for at least 5seconds.
9 Three acoustic signals are emitted.
9 The fan is switched to silent mode.
Dynamic cooling mode
Press the down button for at least 5seconds.
9 Five acoustic signals are emitted.
9 The fan is switched to dynamic cooling mode.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dometic E115FG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dometic E115FG in the language / languages: All languages as an attachment in your email.

The manual is 11.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info