783760
17
Zoom out
Zoom in
Previous page
1/271
Next page
4445103123 17
Wine Refrigerators Mounting and connecting
EN
NOTICE!
Do not place the wine refrigerator in direct sunlight or in the vicinity of strong heat sources (heating appliances,
ovens, etc.).
Only locate the wine refrigerator indoors, never outside.
Check that the voltage specication on the type plate is the same as that of the power supply.
6.1 Installation site
When selecting the location, follow the instructions below:
The wine refrigerator should stand in the coldest part of the room, away from heat sources (ovens, heating devices or
radiators).
The location must not be damp or wet.
The wine refrigerator must not be exposed to direct sunlight. This can damage the acrylic coating and lead to higher power
consumption.
The ground must be level and suciently stable to bear the wine refrigerator at full capacity.
The wine refrigerator must be suciently ventilated. The ventilation slots on the front of the wine refrigerator must not be
obstructed.
Observe the installation dimensions, see technical data.
6.2 Ventilation
NOTICE!
Ensure that the ventilation slots remain clear.
Obstructed ventilation slots lead to increased power consumption and can damage the wine refrigerator.
Model E7FG needs at least 30mm space on the rear side for ventilation (g. , on page 5).
6.3 Adjusting the feet
Make sure the wine refrigerator is level by adjusting the feet (g. , on page 5).
6.4 Reversing the door
You can change the hinge of the door, so that it opens to the le rather than the right.
For reversing the door follow the steps in the mentioned gures:
E18FGB and E49FGB (g. , on page 7 to g. , on page 8)
B29G and B68G (g. , on page 8 to g. , on page 8)
E7FG, E16FG, E28FG, E45FG, C20G and C50G (g. , on page 9 to g. , on page 9)
B162S, B195S, C101G, C125G, E91FG, E115FG (g. , on page 10 to g. , on page 11)
6.5 Mounting the door handle
Mount the door handle on the side opposite to the hinge. To get access to the bores partly li o the sealing at the inside of the
door (g. , on page 5).
6.6 Adjusting the ventilation grille
Adjust the height of the ventilation grill (g. , on page 6).
6.7 Electrical connection
NOTICE!
Leave the wine refrigerator to stand upright for about 2 hours aer transporting, before you connect it to the
power supply. Otherwise this could cause faults in the cooling system.
Observe the following when connecting the wine refrigerator:
Connect the wine refrigerator to a circuit that is protected with 15 A.
Check that the voltage specication on the type plate is the same as that of the power supply.
Have the socket and power circuit checked by a qualied electrician to ensure that the socket is earthed correctly. Do not
use an extension cable or a multiple power socket.
The cable must rest securely behind the wine refrigerator and not be allowed to lie or hang unprotected.
Ensure that the power cable is not jammed when pushing the wine refrigerator into place.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dometic C125G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dometic C125G in the language / languages: All languages as an attachment in your email.

The manual is 11.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info