490375

Domena XL Pro 90 ecofibres Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
- 21 -- 21 -
• Schließen Sie das Stromkabel an eine geerdete Steckdose an.
• Drücken Sie den Knopf “Ein/Aus”.
• Die Kontrolllampe “Unter Spannung” leuchtet auf. Die
Kontrolllampe “Vorheizen des Generators” leuchtet auf.
• Drehen Sie den Dampfregler auf die höchste Stellung.
• Warten Sie 90 Sekunden, bis das Gerät bereit ist. Wenn es
soweit ist, ertönt ein Tonsignal. Wenn Sie den Dampfknopf vor
Ablauf dieser Frist betätigen, macht ein Warnton Sie darauf
aufmerksam, dass der Generator noch nicht bereit ist, Dampf
abzugeben.
• Sobald das Gerät bereit ist, betätigen Sie den Dampfknopf
so lange, bis Dampf austritt. Bei erster Inbetriebnahme
dauert es bis zu 90 Sekunden, bis Dampf erzeugt wird. Solange
die Dampferzeuger-Kontrolllampe nicht erlöscht (ca. 2 Min.), bleibt
die Dampfmenge reduziert. Nach Erlöschen der Kontrolllampe
wird sie automatisch höher.
Hinweise:
Während des Bügelns leuchten die Kontrolllampen “Generator
Vorheizen” und “Bügeleisen” regelmäßig auf und erlöschen wieder:
Das bedeutet, dass Generator und Eisen erhitzt werden. Das ist
ganz normal und hindert Sie weder am Bügeln noch unterbricht es
den Dampfaustritt.
INBETRIEBNAHME - AUFHEIZPHASE
TO OPERATE - HEATING PROCESS
• Plug the power cable into an earthed socket.
• Press the On/Off button.
• The Power On indicator lights comes on to show that the
appliance is switched on. The generator heating pilot light
comes on.
• Turn the variable steam control knob to the High position.
• Wait 90 seconds for the appliance to be ready. At that point you
will hear an audible signal. If you press the steam trigger before
the appliance is ready, an audible signal sounds to indicate that
the generator is not ready to supply steam.
• Once the appliance is ready, press the steam trigger until
steam comes out. When you switch on the iron, it may take
up to 90 seconds before you can call for steam. The steam
output will remain at a reduced level until the generator light
goes out, by which time it will have reached the normal level.
Please note :
Whilst you are ironing, the generator and iron heating pilot lights
repeatedly go on and off. This is normal, and you can continue to
iron and to use the steam.
• Mit dem Thermostat-Regler die für die Bügelwäsche geeignete
Temperatur einstellen.
• Zum Dampfbügeln muss eine Einstellung zwischen -
auf der Skala gewählt werden.
EINSTELLUNG DER THERMOSTATSCHEIBE
THERMOSTAT
MATERIAL
DAMPFMENGE
Fasern: Acetat - Polyacryl - Polyamid
Kein Dampf
Tierische Fasern : Seide - Wolle
Etwas Dampf
Naturfasern: Baumwolle - Leinen
Viel Dampf
• Adjust the thermostat of the iron according to the fabric.
• To use steam please ensure that the thermostat dial is set within
the 2 and 3 dot settings.
THERMOSTAT ADJUSTMENT
Thermostat
Type of cloth
Steam
Synthetic fibres : Acetates -
Polyacrylics - Polyamides
Dry
Natural animal fibres : Silk - Wool
Light steam
Natural plant fibres : Cotton - Linen
Heavy steam
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domena XL Pro 90 ecofibres at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domena XL Pro 90 ecofibres in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info