113217
9
Zoom out
Zoom in
Previous page
1/16
Next page
- 9 -
Réglez le bouton du thermostat du fer selon la nature de votre linge.
Pour l'utilisation de la vapeur, le thermostat du fer doit se trouver
dans la plage
●●
-
●●●
.
Il est recommandé de repasser les pièces de tissu dans l'ordre
des indications marquées sur le bouton du thermostat du fer afin
d'avoir une température croissante.
REGLAGE DU THERMOSTAT
THERMOSTAT
TYPES DE TISSUS
VAPEUR
Fibres synthétiques : acétates - poly-
acryliques - polyamides
Pas de vapeur
●●
Fibres naturelles animales : Soie -
Laine
Légère vapeur
●●●
Fibres naturelles végétales :
Coton - Lin
Beaucoup de
vapeur
Branchez le cordon d’alimentation sur une prise équipée d’une prise
de terre.
Appuyez sur le bouton Marche/Arrêt.
Le témoin de mise sous tension s'allume pour indiquer que l'appareil
est sous tension. Le témoin de chauffe du générateur s’allume.
Tournez le bouton variateur de vapeur sur la position maxi (mode
maxi +).
Attendez 30 secondes que l’appareil soit prêt. L’appareil vous
indique par un signal sonore qu’il est prêt à diffuser de la vapeur
Appuyez sur la gâchette vapeur jusqu’à obtention de la
vapeur. Lors de la première utilisation, la vapeur peut être assez
longue à arriver. Vous restez en débit vapeur réduit tant que le témoin
de chauffe du générateur ne s’est pas éteint (environ 2 min.). Une fois
celui-ci éteint vous obtiendrez un débit vapeur normal.
Remarques:
- Pendant le repassage, les témoins lumineux de chauffe du générateur
et du fer s’allument et s’éteignent régulièrement pour indiquer la
chauffe du générateur et du fer. Ceci est normal, vous pouvez tout de
même demander de la vapeur et repasser.
MISE EN ROUTE - PROCESSUS DE CHAUFFE
Schließen Sie das Stromkabel an eine geerdete Steckdose an.
Drücken Sie den Knopf “Ein/Aus”.
Die Kontrolllampe “Unter Spannung leuchtet auf. Die
Kontrolllampe “Vorheizen des Generators” leuchtet auf.
D r ehen Sie den Dampfregler bis auf die gre Dampfmenge
(“Maxi”-Modus +).
Warten Sie 30 Sekunden, bis das Gerät betriebsbereit ist. Wenn
es soweit ist, ertönt ein Tonsignal.
Betätigen Sie den Dampfknopf so lange, bis Dampf
austritt. Bei erster Inbetriebnahme dauert es bis zu 30 S e k u n d e n ,
bis Dampf erzeugt wird. Solange die Dampferz e u g e r - K o n t ro l l l a m p e
nicht erlöscht (ca. 2 Min.), bleibt die Dampfmenge re d u z i e rt. Nach
Erlöschen der Kontrolllampe wird sie automatisch höher.
Hinweise:
Während des Bügelns leuchten die Kontrolllampen “Generator
Vorheizen” und “Bügeleisen” regelmäßig auf und erlöschen
wieder: Das bedeutet, dass Generator und Eisen erhitzt werden.
Das ist ganz normal und hindert Sie weder am Bügeln noch
unterbricht es den Dampfaustritt.
INBETRIEBNAHME - AUFHEIZPHASE
Mit dem Thermostat-Regler die für die Bügelwäsche geeignete
Temperatur einstellen.
Zum Dampfbügeln muss eine Einstellung zwischen
●●
-
●●●
auf der Skala gewählt werden.
Wir empfehlen, die Wäsche vor dem Bügeln nach den vom
Hersteller empfohlenen Temperaturbereichen zu sortieren und
mit der niedrigsten Bügeltemperatur zu beginnen.
EINSTELLUNG DER THERMOSTATSCHEIBE
THERMOSTAT
MATERIAL
DAMPFMENGE
Fasern: Acetat - Polyacryl - Polyamid
Kein Dampf
●●
Tierische Fasern : Seide - Wolle
Etwas Dampf
●●●
Naturfasern: Baumwolle - Leinen
Viel Dampf
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domena XL 30 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domena XL 30 PRO in the language / languages: English, German, French as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info