323382
9
Zoom out
Zoom in
Previous page
1/40
Next page
- 9 -
Réglez le bouton du thermostat du fer selon la nature de votre linge.
Pour l'utilisation de la vapeur, le thermostat du fer doit se trouver
dans la plage
●●
-
●●●
.
REGLAGE DU THERMOSTAT
THERMOSTAT
TYPES DE TISSUS
VAPEUR
Fibres synthétiques : acétates - poly-
acryliques - polyamides
Pas de vapeur
●●
Fibres naturelles animales : Soie -
Laine
Légère vapeur
●●●
Fibres naturelles végétales :
Coton - Lin
Beaucoup de
vapeur
Regel de thermostaat naargelang het te strijken wasgoed.
Voor stoomstrijken : stel de thermostaatknop in de zone
●●
-
●●●
.
INSTELLING VAN DE THERMOSTAAT
Branchez le cordon d’alimentation sur une prise équipée d’une
prise de terre.
Appuyez sur le bouton Marche/Arrêt.
Le témoin de mise sous tension s'allume pour indiquer que
l'appareil est sous tension. Le témoin de chauffe du générateur
s’allume.
Tournez le bouton variateur de vapeur sur la position maxi.
Attendez environ 2 minutes que l’appareil soit prêt. Les voyants
de chauffe du fer et du générateur sont éteints.
Si vous appuyez sur la gâchette vapeur avant que l’appareil soit
prêt, un signal sonore indique que le générateur n’est pas prêt à
émettre de la vapeur.
Dès que l’appareil est prêt, appuyez sur la gâchette
vapeur jusqu’à obtention de la vapeur.
Remarques:
- Pendant le repassage, les témoins lumineux de chauffe du
générateur et du fer s’allument et s’éteignent régulièrement pour
indiquer la chauffe du générateur et du fer. Ceci est normal, vous
pouvez tout de même demander de la vapeur et repasser.
- Il n’y a pas d’émission de vapeur possible pendant les 2 premières
minutes qui suivent la mise en marche.
MISE EN ROUTE - PROCESSUS DE CHAUFFE
Thermostaat
Stof
Stoomvolume
Synthetische vezels : Acetaat -
Polyacryl - Polyamide
Geen stoom
●●
Dierlijke vezels : Zijde - Wol
Weinig stoom
●●●
Plantaardige vezels : Katoen - Linnen
Veel stoom
OPSTARTEN - VERWARMINGSPROCES
Steek de stekker in een stopcontact met aardleiding.
Druk op de Aan/Uit-knop.
Het spanningslampje gaat branden om aan te geven dat het
apparaat onder spanning staat. Het verwarmingslampje van de
generator gaat branden.
Draai de regelknop voor de stoomafgifte op de max. stand.
Wacht ca. 2 minuten totdat het apparaat gereed is. De
v e r w a r mingslampjes van het strijkijzer en van de generator zijn uit.
Wanneer u op de trekker voor de stoomstoot drukt voordat het
apparaat gereed is, geeft een geluidssignaal aan dat de
generator nog geen stoom kan afgeven.
Zodra het apparaat gereed is, drukt u net zolang op de
trekker voor de stoomstoot tot er stoom komt.
Opmerkingen:
- Tijdens het strijken gaan de verw a rmingslampjes van de
generator en het strijkijzer regelmatig aan en uit, om het
verwarmen van de generator en het strijkijzer aan te geven. Dit
is normaal en u kunt gewoon doorgaan met stoom vragen en
strijken.
- Gedurende de eerste 2 minuten na het inschakelen is er geen
stoomafgifte mogelijk.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domena xellence 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domena xellence 2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info