112611
21
Zoom out
Zoom in
Previous page
1/40
Next page
- 21 -- 21 -
Schließen Sie das Stromkabel an eine geerdete Steckdose an.
Drücken Sie den Knopf “Ein/Aus”.
Die Kontrolllampe “Unter Spannung” leuchtet auf. Die
Kontrolllampe “Vorheizen des Generators” leuchtet auf.
Drehen Sie den Dampfregler auf die höchste Stellung.
Warten Sie rund 2 Minuten, bis das Gerät bereit ist. Die
Kontrolllampen “Vorheizen” und des Generators erlöschen.
Wenn Sie den Dampfknopf vor Ablauf dieser Frist betätigen,
macht ein Warnton Sie darauf aufmerksam, dass der Generator
noch nicht bereit ist, Dampf abzugeben.
Sobald das Gerät bereit ist, betätigen Sie den Dampfknopf
so lange, bis Dampf austritt.
Hinweise:
Während des Bügelns leuchten die Kontrolllampen “Generator
Vorheizen” und “Bügeleisen” regelmäßig auf und erlöschen
wieder: Das bedeutet, dass Generator und Eisen erhitzt werden.
Das ist ganz normal und hindert Sie weder am Bügeln noch
unterbricht es den Dampfaustritt.
Der Dampfaustritt ist nur in den ersten beiden Minuten nach der
Inbetriebnahme nicht möglich.
INBETRIEBNAHME - AUFHEIZPHASE
TO OPERATE - HEATING PROCESS
Plug the power cable into an earthed socket.
Press the On/Off button.
The Power On indicator lights comes on to show that the
appliance is switched on. The generator heating pilot light
comes on.
Turn the variable steam control knob to the High position.
Wait about 2 minutes for the appliance to be ready, when both
the iron and generator heating pilot lights go off.
If you press the steam trigger before the appliance is ready, an
audible signal sounds to indicate that the generator is not ready
to supply steam.
Once the appliance is ready, press the steam trigger until
steam comes out.
Please note :
Whilst you are ironing, the generator and iron heating pilot
lights repeatedly go on and off. This is normal, and you can
continue to iron and to use the steam.
Steam is not available for the first two minutes after switching
on.
Mit dem Thermostat-Regler die für die Bügelwäsche geeignete
Temperatur einstellen.
Zum Dampfbügeln muss eine Einstellung zwischen
●●
-
●●●
auf der Skala gewählt werden.
EINSTELLUNG DER THERMOSTATSCHEIBE
THERMOSTAT
MATERIAL
DAMPFMENGE
Fasern: Acetat - Polyacryl - Polyamid
Kein Dampf
●●
Tierische Fasern : Seide - Wolle
Etwas Dampf
●●●
Naturfasern: Baumwolle - Leinen
Viel Dampf
Adjust the thermostat of the iron according to the fabric.
To use steam please ensure that the thermostat dial is set within
the 2 and 3 dot settings.
THERMOSTAT ADJUSTMENT
Thermostat
Type of cloth
Steam
Synthetic fibres : Acetates -
Polyacrylics - Polyamides
Dry
●●
Natural animal fibres : Silk - Wool
Light steam
●●●
Natural plant fibres : Cotton - Linen
Heavy steam
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domena Xellence 2 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domena Xellence 2 Pro in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info