1. Vergrendelknopen ter opberging en bij transport
2. Bedieningspaneel
A.Hoofdschakelaar aan/uit voor verhitting
(naargelang model)
B.Stoomschakelaar (naargelang model)
C. Booster inschakelknop (naargelang model)
D. Controlelampje netspanning (naargelang
model)
E.Controlelampje voor het vervangen van de
ontkalkingspatroon (naargelang model)
F.Controlelampje thermostaat
3.Temperatuurkeuze thermostaat
4.Warmteplaat
5.Gewatteerde strijk/stoomtafel
6.Instelvak voor de ontkalkingscassette in het
waterreservoir
7.Waterreservoir
8.Hendel voor het openen/sluiten van de pers en
toenemende druk van de warmteplaat
9.Ontkalkingscassette
10.Perskussen (hulpstuk kan optioneel zijn)
DESCRIZIONE
1. Pulsanti di bloccaggio per la sistemazione ed il
trasport
2. Tableau de bord
A.Interruttore MARCIA-ARRESTO dell’
avviamento riscaldamento (secondo il
modello)
B.Interruttore del vapore(secondo il modello)
C. Interruttore funzione Booster (secondo il
modello)
D. Spia luminosa del collegamento elettrico
(suivant modèle)
E.Spia rivelatrice di cambiamento della
cartuccia anticalcare (secondo il modello)
F.Spia luminosa della temperatura
3.Termostato selettore della temperatura
4.Piastra riscaldante
5.Tavolo da stiro imbottito e a vapore
6.Alloggio nel serbatoio per la cartuccia
anticalcare
7.Serbatoio dell’acqua
8.Maniglia per apertura, chiusura della pressa e
pressione progressiva della piastra riscaldante.
Comando automatico del vapore
9.Cartuccia anticalcare
10.Cuscinetto (questo accessorio può essere
opzionale)
Wiring instructions
IMPORTANT FOR U.K. ONLY
WARNING - THIS APPLIANCE MUST BE EARTHED
The cores in the mains lead are coloured in accordance with the following code :
BLUE : NEUTRALBROWN : LIVEGREEN AND YELLOW : EARTH
CONNECTING INSTRUCTIONS
As the colours of the cores in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows : the core
which is coloured BROWN must be connected to the terminal which is marked with the letter Lor coloured RED.
The core which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The core which is coloured GREEN or GREEN and YELLOW must be connected with the terminal which is marked with the letter E or the earth simbol or coloured
GREEN or GREEN and YELLOW.
IF THE TERMINALS OF YOUR 3 PIN PLUG ARE UNMARKED OR IF YOUR INSTALLATION IS FITTED WITH A2 PIN PLUG, CONSULTAQUALIFIED ELECTRICIAN.
IF A13 AMP. PLUG IS FITTED, FITA13 AMP. FUSE.
IMPORTANT SAFETY DEVICE
The mains lead supplied with this equipment is fitted with a 13 amp plug which is fitted with a 13 amp fuse. If you need to examine or change the fuse a correct 13 amp
fuse to BS1362 must be fitted, and the fuse cover must be replaced.If you lose or damage the fuse cover, the plug MUST NOTbe used until a replacement is obtained
from your local After Sales Service Centre.
WARNING : If you cut off the moulded plug, throw it away immediately. This plug is not rewireable and will cause electric shock if it were plugged into an electrical socket.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Domena SP4000 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Domena SP4000 in the language / languages: English, German, Dutch, French, Portuguese, Spanish, Spanish as an attachment in your email.
The manual is 0,47 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
