490371
26
Zoom out
Zoom in
Previous page
1/28
Next page
26
PROBLEMS Causes SOLUTIONS
None of the lights are lit.
The machine does not heat
up.
- Power supply problem
- Appliance not plugged in or
On/Off button not pressed
- Other
- Check the plugs and mains.
. Plug in the appliance and press the
On/Off button.
- Go to your local dealer.
The iron does not heat up. - Thermostat dial at the off position
- Other
- Put the dial to the desired tempera-
ture.
- Go to your local dealer.
No steam is produced. - When you call for steam right at
the start,
- Appliance not ready
- The reservoir is empty
- The reservoir is incorrectly inserted
or has not been inserted.
- The anti-scale cartridge has not
been inserted
- The pilot light ANTI-CALC flashes
or is on
- Other
- Press the steam button until steam
does arrive.
- Wait until the on/off pilot light is on
- Fill the reservoir.
- Insert the reservoir and push it fully in.
- Insert an anti-scale cartridge into the
reservoir.
- Change the anti-scale cartridge. Press
the steam button.
- Go to your local dealer.
Water is produced with the
steam.
- The iron soleplate is not hot enough
- Over steaming
- Water condensation in the hose
- Other
- Put the dial to the settings ●●
●●●.
- Wait for the iron pilot light to go out.
- Press the steam button several times
- Go to your local dealer.
The machine makes a
noise.
- There is no water in the reservoir
- The reservoir is incorrectly inserted
or has not been inserted.
- Other
- Fill the reservoir.
- Insert the reservoir and push it fully in.
- Go to your local approved service
dealer.
Indicator “AUTO-STOP” lit - Auto-Stop activated after 10 minutes
of non-use
- Press the trigger : the pilot light goes
off and the appliance starts heating
again.
ANTI-CALC pilot light
flashes or is lit
- Anti-scale cartridge needs to be
replaced
- Replace the cartridge. Switch the
appliance off and back on. Wait until
the on/off pilot light is permanently
on.
The on / off pilot light
flashes
- The appliance is not ready.
- The appliance is not functional
- Wait until the on/off pilot light is per-
manently on to use the appliance.
- Check if any other pilot light - “AUTO-
STOP” or “ANTI-CALC” - is lit. Follow
the procedures to have these lights
turned off.
What to do if…
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domena Easybox Neo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domena Easybox Neo in the language / languages: English, German, French as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info