323534

Domena cr 3 ecofibres Manual

23
Zoom out
Zoom in
Previous page
1/36
Next page
-
23
-
23.Schließen Sie das Stromkabel an eine geerdete
Steckdose an.
24.Drücken Sie den Knopf “Ein/Aus”.
25.Die Kontrolllampe “Unter Spannung” leuchtet auf.
Die Kontrolllampe “Vorheizen des Generators”
leuchtet auf.
26.Stellen Sie den Dampfregler auf die Mitte der
Dampfskala.
Warten Sie 30 Sekunden, bis das Gerät
betriebsbereit ist. Wenn es soweit ist, ertönt ein
Tonsignal.
27.
Betätigen Sie den Dampfknopf so lange, bis
Dampf austritt.
Bei erster Inbetriebnahme dauert
es bis zu 30 Sekunden, bis Dampf erzeugt wird.
Solange die Dampferzeuger-Kontrolllampe nicht
erlöscht (ca. 2 Min.), bleibt die Dampfmenge
reduziert. Nach Erlöschen der Kontrolllampe wird sie
automatisch höher.
Hinweise:
Während des Bügelns leuchten die Kontrolllampen
“Generator Vorheizen” und “Bügeleisen” regelmäßig
auf und erlöschen wieder: Das bedeutet, dass
Generator und Eisen erhitzt werden. Das ist ganz
normal und hindert Sie weder am Bügeln noch
unterbricht es den Dampfaustritt.
HINWEIS: Die Bügelfläche heizt automatisch
auf, wenn das Netzkabel in der Steckdose
eingesteckt ist, damit der Dampf nicht
kondensieren kann und die Wäsche perfekt
getrocknet wird. Der Bügeltisch-Bezug bleibt
trocken, selbst während einer längeren
Inbetriebnahme mit Dampf.
Bei längerer Benutzung Ihres Bügeltisches
(insbesondere dann, wenn der Lüfter nicht in
Betrieb ist) kann die Metallplatte unter dem
Tisch sehr heiß werden, vor allem an der
Spitze des Tisches. Vermeiden Sie deshalb
zu Ihrer eigenen Sicher
heit den Kontakt mit
der Platte.
INBETRIEBNAHME
AUFHEIZPHASE
23.Plug the power cable into an earthed socket.
24.Press the On/Off button.
25.The Power On pilot light comes on to show that the
appliance is switched on. The generator heating
pilot light comes on.
26.Turn the steam output dial to the middle setting.
Wait 30 seconds before the trying to use the iron.
At that point you will hear an audible signal.
27.
Press steam trigger until steam comes out.
When you switch on the iron, it may take up to 30
seconds before you can call for steam. The steam
output will remain at a reduced level until the
generator light goes out, by which time it will have
reached the normal level.
Please note :
Whilst you are ironing, the generator and iron heating
pilot lights repeatedly go on and off. This is normal,
and you can continue to iron and to use the steam.
EXTRA SAFETY : The ironing table heats up
automatically as soon as the appliance is
switched on. In this way it eliminates the risk
of condensation forming and so guarantees
the perfect drying off of garments.
The foam cover remains dry even after pro-
longed steaming from the iron.
When using your active ironing board,
particularly when the ventilator is switched
off, the underneath of the metal tabletop
could become very hot especially at the
pointed end. For your own safety, avoid
touching it.
TO OPERATE - HEATING
PROCESS
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domena cr 3 ecofibres at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domena cr 3 ecofibres in the language / languages: English, German, French as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info