507715

Dolmar PV3936 Manual

7
Zoom out
Zoom in
Previous page
1/52
Next page
7
ENG
which is away from the operator.
15.Do not start the engine when standing in front of
the discharge chute.
16.Do not put hands or feet near or under rotating
parts. Keep clear off the discharge opening at all
limes.
17.Never lift carry the aerator while it is running.
18.Stop the engine and disconnect the spark plug
wire:
18.1 Before clearing blockages or unclogging
chute.
18.2 Stop the engine and wait until the blades
have stopped before removing the grass catcher
or unclogging chute. When cleaning, repairing,
or inspecting, make sure that blades and all
mowing parts have stopped. Disconnect the spark
plug wire, and keep the wire away from the plug
to prevent any accidental starting.
18.3 After striking a foreign object, stop the engine,
disconnect the spark plug wire, thorouglhy inspect
the aerator for any damage. Repair it before
starting again. Always call specialised service
centres.
18.4 If the equipment should start to vibrate
abnormally, stop the engine and check
immediately for the cause. Vibration is generally
a warning of trouble.
19.Stop the engine.
19.1 Whenever you leave the aerator
19.2 Before refuelling.
20.Reduce the throttle setting during engine shut
down and, if the engine is provided with a shut-off
valve, turn the fuel off at the conclusion of mowing.
21.When the motor is running the safety distance,
given bay the handle, must always by maintained.
MAINTENANCE AND STORAGE
1. Keep all nuts, bolts and screws tight to be sure
the equipment is in a safe working condition.
2. Never store it with gasoline in the tank inside a
building where fumes may reach an open flame
or spark.
3. Allow the engine to coll before storing in any
enclosures.
4. To reduce fire hazard, keep the engine and the
silencer free of grass, leaves, or excessive
grease.
5. Check the grass catcher frequently for wer or
deterioration.
6. Replace worn or damaged parts for safety.
Use only original spare parts. Parts not produced
by manufacturer may cause poor fit and possible
injury.
7. If the fuel tanks has to be drained, this should be
done outdoors.
8. Regularly check or have a service centre check
the tightening of blades and bolts that support the
motor.
9. Blade replacement is complicate operation which
involve specific competence as well as special
equipment. For safety reasons, this operation
must be carried out by a specialised technical
assistance centre.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar PV3936 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar PV3936 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 14,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info