Manual Dolmar PS-500 (page 10 of 80) (English, French)

499346

Zoom out

Zoom in

1/80

Position the chain saw in such a way that your body is

clear of the cutting attachment whenever the engine

is running (g. 10).

Don’t put pressure on the saw when reaching the end

of a cut. The pressure may cause the bar and rotating

chain to pop out of the cut or kerf, go out of control

and strike the operator or some other object. If the

rotating chain strikes some other object a reactive

force (see pages 11 to 13 ) may cause the chain to

strike the operator.

Reactive forces during the cut, including kickback

WARNING!

Reactive forces, that may occur during any cut are

kickback, pushback and pull-in. Reactive forces

can be dangerous! In any chain saw, the powerful

force used to cut wood can be reversed (and work

against the operator).

If the rotating chain is suddenly stopped by con-

tact with any solid object like a log or branch or is

pinched, the reactive forces instantly occur. These

reactive forces may result in loss of control which

may, in turn, cause serious or fatal injury. An un-

derstanding of the causes of these reactive forces

may help you avoid loss of control.

The most common reactive forces are

- kickback,

- pushback,

- pull-in.

In order to keep control of your saw, always maintain

a rm foothold. Never work on a ladder, in a tree or on

any other insecure support. Never use the saw above

shoulder height (g. 9).

This reaction can occur in a fraction of a second and

under some circumstances, cause the guide bar and

chain to strike the operator with enough force to cause

severe or fatal injury. It may also occur during limbing. It

also occurs when the nose of the guide bar is pinched

unexpectedly, unintentionally contacts solid material

in the wood (g.12) or is incorrectly used to begin a

plunge or boring cut.

The greater the force of the kickback reaction, the

more difcult it becomes for the operator to control

the saw.

Kickback:

Kickback occurs when the upper quadrant of the bar

nose contacts a solid object in the wood or is pinched

(g. 11). The reaction of the cutting force of the chain

causes a rotational force of the chain saw in the direc

tion opposite to the chain movement, mainly in the plane

of the bar. This may ing the bar in an uncontrolled arc

towards the operator.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar PS-500 in the language / languages: English, French as an attachment in your email.

The manual is 9,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dolmar PS-500

Dolmar PS-500 User Manual - German - 32 pages

Dolmar PS-500 User Manual - Dutch - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dolmar PS-500 Manual

Product: