507629
29
Zoom out
Zoom in
Previous page
1/40
Next page
29
1
2
7
3
4
5
3
4
6
CAUTION: To prevent eye injury, always wear eye protection
when cleaning the Þ lter with compressed air!
Do not use fuel to clean the air Þ lter.
Unscrew the hood lock (1) counter-clockwise and remove the
hood (2).
Push up the combination switch (3) (Choke position) to prevent
dirt particles from falling into the carburetor.
Pull the air Þ lter (4) up and out.
IMPORTANT: Cover the intake opening with a clean cloth to
prevent dirt particles from getting into the carburetor.
Choosing the right Þ lter: The ß eece Þ lter (available as acces-
sory) is for use in dry or dusty conditions. The nylon Þ lter is for
use in damp conditions.
Pry apart the top and bottom of the air Þ lter as shown in Fig-
ure.
Cleaning the ß eece Þ lter: Carefully tap out dust or carefully
blow out dust from the inside with compressed air. Do not
brush the ß eece, as this will force dirt particles into the fabric.
If the Þ lter is very dirty, it can be washed in lukewarm water
with regular dishwashing detergent. Note that the ß eece Þ lter
does not need to be cleaned until there is a noticeable loss of
power. If cleaning the Þ lter does not bring an improvement in
performance, it is time to replace it.
Cleaning the nylon Þ lter: Use a soft brush or blow out dirt
from the inside with compressed air. If the Þ lter is very dirty, it
can be washed in lukewarm water with regular dishwashing
detergent. Clean frequently (several times a day) when working
in very dusty or dirty conditions. Full engine power is possible
only with a clean air Þ lter!
Let the air Þ lter dry completely.
Put the top and bottom sections back together.
Before assembling the air Þ lter, check the choke ß ap for any dirt
particles. If there are any, remove them with a brush.
Clean the area around the O-ring (5) at the induction opening.
If the O-ring is damaged, replace it!
CAUTION: If the air Þ lter becomes damaged, replace imme-
diately! Pieces of cloth or large dirt particles can destroy
the engine!
Insert an air Þ lter (4).
Push down the combination switch (3
) and press the throttle
(6) all the way down one time in order to deactivate the throt-
tle lock.
Put the hood (2) back on, Þ rst guiding the two holders (7) into
their slots.
Screw the hood lock (1) back on tightly clockwise.
Cleaning the air Þ lter
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar PS-420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar PS-420 in the language / languages: English as an attachment in your email.

The manual is 8,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dolmar PS-420

Dolmar PS-420 User Manual - German - 40 pages

Dolmar PS-420 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info