507619
18
Zoom out
Zoom in
Previous page
1/64
Next page
18
Technical data PS-340 PS-341 PS-400 PS-401
Single-cylinder two-stroke
Piston displacement 2.0 cu. in (33 cm
3
) 2.0 cu. in (33 cm
3
) 2.4 cu. in (39 cm
3
) 2.4 cu. in (39 cm
3
)
Cylinder bore 1.45" (37 mm) 1.45" (37 mm) 1.57" (40 mm) 1.57" (40 mm)
Piston stroke 1.22" (31 mm) 1.22" (31 mm) 1.22" (31 mm) 1.22" (31 mm)
Max. power at speed 1.4/9,000 kW/rpm 1.4/9,000 kW/rpm 1.7/9,000 kW/rpm 1.7/9,000 kW/rpm
Max. torque at speed 1.7/6,500 Nm/rpm 1.7/6,500 Nm/rpm 2.0/6,500 Nm/rpm 2.0/6,500 Nm/rpm
Idling speed 2,600 rpm 2,600 rpm 2,600 rpm 2,600 rpm
Ignition system
Electronic, without breaker
Spark plug NGK BPMR 6F NGK BPMR 6F NGK BPMR 6F NGK BPMR 6F
or Spark plug
CHAMPION RDJ-7Y CHAMPION RDJ-7Y CHAMPION RDJ-7Y CHAMPION RDJ-7Y
Electrode gap .020" (0.5 mm) .020" (0.5 mm) .020" (0.5 mm) .020" (0.5 mm)
Fuel system
Carburetor (for Canada) WALBRO WT 174 WALBRO WT 174 WALBRO WT 174 WALBRO WT 174
Carburetor (for USA) WALBRO WT 466 WALBRO WT 466 WALBRO WT 466 WALBRO WT 466
(all position diaphragm carburetor
with integral fuel pump)
Air filter Robkoflok Robkoflok Robkoflok Robkoflok
Fuel tank capacity 13.3 oz. (0.4 l) 13.3 oz. (0.4 l) 13.3 oz. (0.4 l) 13.3 oz. (0.4 l)
Fuel mixture see chapter "Fuel" see chapter "Fuel" see chapter "Fuel" see chapter "Fuel"
Weight
without cutting attachment 8 lbs. 9 oz. (3.9 kg) 8 lbs. 9 oz. (3.9 kg) 8 lbs. 13 oz. (4.0 kg) 8 lbs. 13 oz. (4.0 kg)
Cutting attachment
Guide bar sprocket nose bar sprocket nose bar sprocket nose bar sprocket nose bar
Cutting length 12" (30 cm) 12" (30 cm) 12" (30 cm) 12" (30 cm)
14" (35 cm) 14" (35 cm) 14" (35 cm) 14" (35 cm)
16" (40 cm) 16" (40 cm) 16" (40 cm) 16" (40 cm)
Safety saw chain (pitch) 3/8" (528 092 ...) (528 092 ...) (528 092 ...) (528 092 ...)
Drive link gauge .050" X X X X
Chain sprocket 6 teeth (028 223 310) (028 223 310) (028 223 310) (028 223 310)
Chain lubrication fully automatic oil fully automatic oil fully automatic oil fully automatic oil
pump pump pump pump
Oil tank capacity 7.1 oz. (0.21 l) 7.1 oz. (0.21 l) 7.1 oz. (0.21 l) 7.1 oz. (0.21 l)
Approved bar and chain combinations
"Low-kickback saw chain is a chain which has met the
kickback performance requirements of ANSI B 175.1-
1991 (American National Standard for Power Tools-
Gasoline-Powered Chain Saws-Safety Requirements)
when tested on the representative sample of chain
saws below 3.8. C.l.D. specifed in ANSI B 175.1-
1991". The approved bar and chain combinations are
low kickback chains according to ANSI B 175.1-1991
and also meet the kickback requirements of CSA
Z62.3-96 for chain saws below 80 cm
3
.
The chain saw PS-340, PS-341, PS-400, PS-401 has
been approved with following guide bar and chain
combinations:
Guide bar 3/8" Saw chain 3/8"
length Part no. Part no.
12" (30 cm) 412 030 661 528 092 046
14" (35 cm) 412 035 661 528 092 052
16" (40 cm) 412 040 661 528 092 056
"There may be other replacement bar and chain combi-
nations available that also reduces the risk of injury
from kickback".
WARNING
Do not use other replacement bars and chains
unless they have been designated as meeting the
ANSI B 175.1-1991 (for USA) and CSA Z62.3-96
(for Canada) kickback performance requirements
on that specific powerhead, or has been desig-
nated as "low kickback" saw chain in accordance
with the ANSI B 175.1-1991 (for USA) and CSA
Z62.3-96 (for Canada) standard.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar PS-401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar PS-401 in the language / languages: English, French as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dolmar PS-401

Dolmar PS-401 User Manual - German - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info