Manual Dolmar PS-401 (page 13 of 64) (English, French)

507619

Zoom out

Zoom in

1/64

45°

= cutting down area

First clear the tree base and work area from interfering

limbs and brush and clean its lower portion with an axe

(see fig. 18).

When felling, maintain a distance of at least 2 1/2 tree

lengths from the nearest person (see fig. 17)

Note:

The noise of your engine may drown any warning call.

Felling instructions:

45°

Then, establish a path of escape and remove all

obstacles. This path should be opposite to the planned

direction of the fall of the tree and at a 45° angle (fig.

19). An alternate path must also be selected. Place all

tools and equipment a safe distance away from the

tree, but not on the escape path.

Then, determine the placement of the felling notch

(fig. 21). The felling notch when properly placed de-

termines the direction in which the tree will fall. It is

made perpendicular to the line of fall and should be as

close to the ground as possible. Cut the felling notch to

a depth of about one-fifth to one-fourth of the trunk

diameter (fig. 22). It should be in no case higher than

it is deep. Make the felling notch very carefully.

1/10∅

1/5∅

(4cm)

Felling notch

Hinge

Felling cut

Direction of fall

Hinge

Felling notch

First cut

Second cut

If the tree has large buttress roots, cut into the largest

buttresses vertically first (horizontally next) and remove

(fig. 20).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar PS-401 in the language / languages: English, French as an attachment in your email.

The manual is 6,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dolmar PS-401

Dolmar PS-401 User Manual - German - 26 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dolmar PS-401 Manual

Product: