47796
15
Zoom out
Zoom in
Previous page
1/128
Next page
15
ENGLISH
Thank you for purchasing a DOLMAR product!
Congratulations on choosing a DOLMAR chain saw! We are confident that you will be
satisfied with this modern piece of equipment.
The PS-220 TH/PS-221 TH (Tophandle) is a very light and handy chain saw with the
handle on the top. This model was developed especially for tree surgery and care.
Only persons who have completed training in working from elevated platforms (cherry
pickers, lifts), from platforms mounted on ladders or who are proficient in climbing
with ropes are permitted to operate this chain saw.
The automatic chain lubrication with variable-flow oil pump and maintenance-free
electronic ignition ensure trouble-free operation, while the hand-saving anti-vibration
system and ergonomic grips and controls make work easier, safer, and less tiring for
the user.
The safety features of the PS-220 TH/PS-221 TH are state of the art and meet all
German and international safety standards.
They include handguards on both grips, grip safety, chain catch, safety saw chain,
and chain brake. The chain brake can be actuated manually, and is also inertia-actu-
ated automatically in case of kickback.
In order to ensure the proper functioning and performance of your
new chain saw, and to safeguard your own personal safety, it is
imperative that you read this instruction manual thoroughly before
operation. Be especially careful to observe all safety precautions!
Failure to observe these precautions can lead to severe injury or
death!
EU Conformity Declaration
The undersigned, Shigeharu Kominami and Rainer Bergfeld, as authorized by,
declare that the DOLMAR machines,
Type: 023 EU prototype test certificate No.
PS-220 TH/PS-221 TH M6 04 10 24243 059
manufactured by Makita Corporation, 3-11-8, Sumiyoshi-cho, Anjo, Aichi, Japan, con-
forms to the basic safety and health requirements of the applicable EU guidelines:
EU Machine guideline 98/37/EG,
EU EMC guideline 89/336/EWG (modified by 91/263/EWG, 92/31/EWG and 93/68/
EWG),
Noise emission 2000/14/EG.
The most important standards applied to properly meet the requirements of the
above EU guidelines were: EN 14982, EN ISO 11681-2, EN 61000-4-2, EN 61000-4-
3, CISPR 12.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The
measured noise level (Lwa) is 106 dB(A). The guaranteed noise level (Ld) is
107 dB(A).
The EG Type-Examination per 98/37/EG was performed by: TÜV Product Service
GmbH, Zertifizierstelle, Ridlerstr. 31, D-80339 Munich.
Hamburg, CE2004
For DOLMAR GmbH
Table of contents Page
EU Conformity Declaration.....................................................................................15
Packing.....................................................................................................................15
SAFETY PRECAUTIONS
General precautions ............................................................................................16
Protective equipment...........................................................................................16
Fuels / Refuelling.................................................................................................16
Putting into operation ..........................................................................................16
Kickback ..............................................................................................................16
Working behavior/Method of working ............................................................ 16-17
Transport and storage .........................................................................................17
Maintenance........................................................................................................17
First aid................................................................................................................17
Technical data..........................................................................................................17
Denomination of components................................................................................18
PUTTING INTO OPERATION
Mounting the guide bar and saw chain................................................................18
Tightening the saw chain.....................................................................................18
Chain brake .........................................................................................................18
Fuels / Refuelling........................................................................................... 18-19
Adjusting the chain lubrication.............................................................................19
Checking the chain lubrication ............................................................................19
Starting the engine ..............................................................................................19
Cold start.............................................................................................................19
Warm start...........................................................................................................19
Stopping the engine ............................................................................................19
Checking the chain brake ....................................................................................19
Adjusting the carburetor ........................................................................................19
MAINTENANCE
Sharpening the saw chain ...................................................................................20
Cleaning the guide bar, lubricating the sprocket nose.........................................20
Replacing the saw chain......................................................................................20
Replacing the suction head .................................................................................20
Cleaning the air filter ...........................................................................................20
Replacing the spark plug.....................................................................................20
Cleaning the muffler ............................................................................................20
Cleaning the cylinder space ................................................................................20
Instructions for periodic maintenance..................................................................21
Service, spare parts and guarantee ......................................................................21
Trouble shooting .....................................................................................................22
Packing
Your DOLMAR chain saw will be delivered in a protective cardboard box to prevent
transport damage.
Cardboard is a basic raw material and is consequently reuse-able or suitable for recy-
cling (waste paper recycling).
Shigeharu Kominami
Managing Director
Rainer Bergfeld
Managing Director
RE Y
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar PS-221 TH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar PS-221 TH in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info