To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be performed regularly. Guarantee claims can be rec-
ognized only if this work is performed regularly and properly. Failure to perform the prescribed maintenance work can lead to accidents!
The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All such work must be carried out by a DOLMAR service centre.
Service, spare parts and guarantee
Maintenance and repair
The maintenance and repair of modern engines as well as all safety devices require
qualified technical training and a special workshop equipped with special tools and
testing devices.
We therefore recommend that you consult a DOLMAR service centre for all work not
described in this instruction manual.
The DOLMAR service centres have all the necessary equipment and skilled and
experienced personnel, who can work out cost-effective solutions and advise you in
all matters.
Please contact your nearest service centre.
Spare parts
Reliable long-term operation, as well as the safety of your chain saw, depend among
other things on the quality of the spare parts used. Use only original DOLMAR parts.
Only original spare parts and accessories guarantee the highest quality in material,
dimensions, functioning and safety.
Original spare parts and accessories can be obtained from your local dealer. He will
also have the spare part lists to determine the required spare part numbers, and will
be constantly informed about the latest improvements and spare part innovations.
Please bear in mind that if parts other than original DOLMAR spare parts are used,
this will automatically invalidate the DOLMAR product guarantee.
Guarantee
DOLMAR guarantees the highest quality and will therefore reimburse all costs for
repair by replacement of damaged parts resulting from material or production faults
occurring within the guarantee period after purchase. Please note that in some coun-
tries particular guarantee conditions may exist. If you have any questions, please con-
tact your salesman, who is responsible for the guarantee of the product.
Please note that we cannot accept any responsibility for damage caused by:
•Disregard of the instruction manual.
•Non-performance of the required maintenance and cleaning.
•Incorrect carburetor adjustment.
•Normal wear and tear.
•Obvious overloading due to permanent exceeding of the upper performance limits.
•Use of guide bars and chains which have not been approved.
•Use of guide bar and chain lengths which have not been approved.
•Use of force, improper use, misuse or accidents.
•Damage from overheating due to dirt on the recoil starter.
•Work on the chain saw by unskilled persons or inappropriate repairs.
•Use of unsuitable spare parts or parts which are not original DOLMAR parts, inso-
far as they have caused the damage.
•Use of unsuitable or old oil.
•Damage related to conditions arising from lease or rent contracts.
Cleaning, servicing and adjustment work is not covered by the guarantee. All repairs
covered by the guarantee must be performed by a DOLMAR service centre.
GeneralChain sawClean exterior, check for damage. In case of damage, have repaired by a qualified service centre
immediately.
Saw chainSharpen regularly, replace in good time.
Chain brakeHave inspected regularly at an authorized service centre.
Guide barTurn over to ensure even wear of bearing surfaces.
Replace in good time.
Before each startSaw chainInspect for damage and sharpness.
Check chain tension.
Guide barCheck for damage.
Chain lubricationFunctional check.
Chain brakeFunctional check.
OFF switch, Safety locking button,
Throttle lever
Functional check.
Fuel/oil tank plugCheck for tightness.
Every dayAir filterClean.
Guide barCheck for damage, clean oil intake bore.
Guide bar supportClean, in particular the oil guide groove.
Idle speedCheck (chain must not run).
Every weekFan housingClean to ensure proper air cooling.
Cylinder spaceClean.
Spark plugCheck and replace if necessary.
MufflerCheck tightness of mounting.
Chain catch sleeveCheck for damage, replace if necessary.
Every 3 monthsSuction headReplace.
Fuel, oil tanksClean.
StorageChain sawClean exterior, check for damage. In case of damage, have repaired by a qualified service centre
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Dolmar PS-220 TH at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Dolmar PS-220 TH in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.
The manual is 4,79 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
