507643
33
Zoom out
Zoom in
Previous page
1/189
Next page
16
TROUBLESHOOTING
INSTRUCTIONS FOR PERIODIC MAINTENANCE AND CARE
To ensure long life, prevent damage and ensure the full functioning of the safety features, the following maintenance must
be performed regularly.
Guarantee claims can be recognized only if the work is performed regularly and properly. Failure to perform the prescribed
maintenance work can lead to accidents!
The user of the electric chain saw is not allowed to perform maintenance work which is not described in this instruction
manual. All other works must be carried out by a DOLMAR service centre.
Malfunction System Observation Cause
Chain saw does not work
Insufficient performance
No chain lubrication
Chain brake
Run-down brake
total
Carbon brushes
Oil tank, oil pump
Brake
Brake
Electric motor does not func-
tion
Low pulling power
No chain oil on the saw
chain
Saw chain does not stop
instantly
Saw chain coasts
No power supply
Cable defective
Chain brake actuated
Mains fuse blown
Carbon brushes worn down
Oil tank empty
Oil guide groove dirty
Brake band worn down
Carbon brushes worn down
General work Electric chain saw
Plastic housing
Saw chain
Guide bar
Sprocket
Chain brake
Run-down brake
Regularly clean the outside.
Check for cracks and ruptures. In case of damage, have it
immediately repaired at a service centre.
Resharpen regularly.
Replace in time.
Turn over after a certain period of time so that the bearing
surfaces are uniformly worn.
Replace in time.
Have it replaced in time at a service centre.
Have it inspected regularly at a service centre.
Have it inspected regularly at a service centre.
Before each use Saw chain
Guide bar
Chain lubrication
Chain brake
Run-down brake
Switch trigger
Power supply cable
Oil tank cap
Check for damage and sharpness.
Check the chain tension.
Check for damage, and remove burrs if necessary.
Functional check.
Functional check.
Functional check.
Functional check.
In case of damage, have it replaced at a service centre.
Check for tightness.
After each taking out of
service
Guide bar
Chain carrier
Oil feed hole.
Clean, especially the oil guide groove.
Storage Chain oil tank
Saw chain/guide bar
Electric chain saw
Empty.
Demount, clean and lubricate slightly.
Clean the guide groove of the guide bar.
Store safely in a dry place.
After a long storage time, have the electric chain saw
checked at a service centre (residual oil can become resin-
ous and the valve of the oil pump clogged).
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar ES-33A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar ES-33A in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info