Manual Dolmar AY-1820H (page 11 of 28) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

598412

Zoom out

Zoom in

1/28

8. Inspect the cutting tool at short regular intervals for

damage (detection of hairline cracks by means of

tapping-noise test).

9. Before commencing cutting, the cutting tool must have

reached full working speed.

10. The cutting tool has to be equipped with the

appropriate guard. Never run the equipment with

damaged guards or without guards in place!

11. All protective installations and guards supplied with

the equipment must be used during operation.

12. Always remove the battery cartridge from the

equipment:

- whenever leaving the equipment unattended;

- before clearing a blockage;

- before checking, cleaning or working on the

equipment;

- after striking a foreign object;

- whenever the equipment starts vibrating abnormally.

13. Always ensure that the ventilation openings are kept

clear of debris.

Cutting Tools

1. Employ only the correct cutting tool for the job in hand.

Maintenance instructions

1. The condition of the equipment, in particular of the

cutting tool of the protective devices must be checked

before commencing work.

2. Turn off the motor and remove the battery cartridge

before carrying out maintenance, replacing cutting

tools or cleaning the equipment or cutting tool.

3. Check loose fasteners and damaged parts such as

cracks in the cutting attachment.

4. Follow instructions for lubricating and changing

accessories.

5. When not in use, store the equipment indoors in dry

and high or locked-up place - out of the reach of

children. Clean and maintain before storage.

6. Use only the manufacturer’s recommended

replacement parts and accessories.

7. Inspect and maintain the equipment regularly,

especially before/after use. Have the equipment

repaired only by our authorized service center.

8. Keep handles dry, clean and free from oil and grease.

KEEP FOR FUTURE REFERENCE

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

CORDLESS HEDGE TRIMMER

SAFETY WARNINGS GEB062-4

1. Hold the power tool by insulated gripping surfaces

only, because the cutter blade may contact hidden

wiring. Cutter blades contacting a “live” wire may

make exposed metal parts of the power tool “live” and

could give the operator an electric shock.

2. Keep all parts of the body away from the cutter

blade. Do not remove cut material or hold material

to be cut when blades are moving. Make sure the

switch is off when clearing jammed material. A

moment of inattention while operating the hedge

trimmer may result in serious personal injury.

3. Carry the hedge trimmer by the handle with the

cutter blade stopped. When transporting or

storing the hedge trimmer always fit the cutting

device cover. Proper handling of the hedge trimmer

will reduce possible personal injury from the cutter

blades.

4. Do not use the hedge trimmer in the rain or in wet or

very damp conditions. The electric motor is not

waterproof.

5. First-time users should have an experienced hedge

trimmer user show them how to use the trimmer.

6. The hedge trimmer must not be used by children or

young persons under 18 years of age. Young persons

over 16 years of age may be exempted from this

restriction if they are undergoing training under the

supervision of an expert.

7. Use the hedge trimmer only if you are in good physical

condition. If you are tired, your attention will be

reduced. Be especially careful at the end of a working

day. Perform all work calmly and carefully. The user is

responsible for all damages to third parties.

8. Never use the trimmer when under the influence of

alcohol, drugs or medication.

9. Work gloves of stout leather are part of the basic

equipment of the hedge trimmer and must always be

worn when working with it. Also wear sturdy shoes

with anti-skid soles.

10. Before starting work check to make sure that the

trimmer is in good and safe working order. Ensure

guards are fitted properly. The hedge trimmer must

not be used unless fully assembled.

11. Make sure you have a secure footing before starting

operation.

12. Hold the tool firmly when using the tool.

13. Do not operate the tool at no-load unnecessarily.

14. Immediately switch off the motor and remove the

battery cartridge if the cutter should come into contact

with a fence or other hard object. Check the cutter for

damage, and if damaged repair immediately.

15. Before checking the cutter, taking care of faults, or

removing material caught in the cutter, always switch

off the trimmer and remove the battery cartridge.

16. Switch off the trimmer and remove the battery

cartridge before doing any maintenance work.

17. When moving the hedge trimmer to another location,

including during work, always remove the battery

cartridge and put the blade cover on the cutter blades.

Never carry or transport the trimmer with the cutter

running. Never grasp the cutter with your hands.

18. Clean the hedge trimmer and especially the cutter

after use, and before putting the trimmer into storage

for extended periods. Lightly oil the cutter and put on

the cover. The cover supplied with the unit can be

hung on the wall, providing a safe and practical way to

store the hedge trimmer.

19. Store the hedge trimmer with the cover on, in a dry

room. Keep it out of reach of children. Never store the

trimmer outdoors.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar AY-1820H in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dolmar AY-1820H Manual

Product: