598411
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
Specifications and battery cartridge may differ from country to country.
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
END010-2
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.................... Take particular care and attention.
....... Read instruction manual.
................... Danger; be aware of thrown objects.
.................. Keep bystanders away.
................... Cutting means continues to run after
the motor is switched off.
................... Do not expose to moisture.
............ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
ENE015-1
The tool is intended for cutting lawn edges or sprouts.
General Power Tool Safety
Warnings GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Lock-off button
6. Switch trigger
7. Indication lamp
8. Change lever
9. Protrusion on base frame
10. Base frame
11. Shear blades
12. Blade cover
13. Blade frame
14. Groove
15. Locking lever
16. Undercover
17. Press
18. Turn
19. Shear blade
20. Crank
21. Basic alignment line on the tool
housing
22. Pins
23. Recessed part of crank
24. Apply grease
25. Base plate
26. Hole in the base plate of shear
blades
27. Oval holes that are overlapped
28. Groove in the undercover
29. Brush
30. Machine oil
31. Hedge shear blade
32. Hedge shear blade cover
33. Storage case
34. Bent part of the base plate of
shear blades
35. Screws
36. Grass shear blade cover
37. Grass shear blade
38. Trimming direction
39. Tilt the blades
40. Hedge surface to be trimmed
41. String
42. Clamping nuts
43. Chip receiver
44. Screws on the shear blades
45. Blade cover to be always installed
before installing the chip receiver
46. Hook hole
Model AX-1820H, AY-1820H
Effective cutting width 160 mm
Stroke per minute (min
-1
) 1,250
Rated voltage D.C. 18 V
Battery cartridge AP-181 AP-183
Dimensions (L x W x H) 337 mm x 176 mm x 130 mm 353 mm x 176 mm x 130 mm
Net weight 1.4 kg 1.6 kg
(Optional accessory)
Blade length of optional hedge shear
blades
200 mm
Cd
Ni-MH
Li-ion
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar AX-1820H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar AX-1820H in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info