598408
8
Zoom out
Zoom in
Previous page
1/25
Next page
8
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
Specifications and battery cartridge may differ from country to country.
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear
ear protection.
ENG901-1
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
1. Battery cartridge
2. Speed adjusting dial
3. Indication lamp
4. Power button
5. Lock-off lever
6. Hanger (suspension point)
7. Grip
8. Switch trigger
9. Guard
10. Wire guard
11. Cutting tool
12. Shoulder harness
13. Cap
14. Red indicator
15. Button
16. Power indicator
17. Reversing switch
18. A position depressed for normal
operation
19. B position depressed for weed
and debris removal
20. Star marking
21. Battery indicator
22. Most effective cutting area
23. Joint
24. Lock lever
25. Joint cover
26. Lever
27. Pipe (Cutting tool side)
28. Concave portion
29. Protrusion
30. Hex bolts
31. Cover
32. Clamps
33. Cutting tool side
34. Spacer
35. Grooves
36. Protector
37. Concave portions
38. Protector holder
39. Protrusions
40. Holes
41. Nylon cutting head
42. Metal guard
43. Receive washer
44. Hex wrench
45. Buckle
46. Hook
47. Hex bolt
48. 80-100 mm
Model AT-1831 C AT-1831 CD
Type of pipe Integrated pipe Splittable pipe
No load speed 3,500 - 6,000 min
-1
Overall length with nylon cutting head 1,843 mm
Split length 982 mm
Cutting diameter with nylon cutting head 300 mm
Net weight 3.9 kg 4.1 kg
Rated voltage D.C. 18 V
Standard battery cartridge and charger
Always keep the combinations of
battery/charger on the right columns.
AP-183/LG-184
Noise Sound pressure level
Applicable standard or
directive
Model L
PA
(dB (A)) Uncertainty K (dB (A))
AT-1831 C/AT-1831 CD 79 0.7 2000/14/EC
Vibration Front grip Rear grip
Applicable
standard or
directive
Model a
h
(m/s
2
)
Uncertainty K
(m/s
2
)
a
h
(m/s
2
)
Uncertainty K
(m/s
2
)
AT-1831 C/AT-1831 CD 2.5 1.5 2.5 1.5 EN786
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar AT-1831CD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar AT-1831CD in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info