766039

Dogtrace X30 Manual

21
Zoom out
Zoom in
Previous page
1/119
Next page
21
ENGLISH
8.6 BEEPER feature – indicating standing still
The BEEPER feature is mainly used by gamekeepers/hunters to distinguish the
intensity of movement or the presence of a dog near wild pig.
If the transmitter (collar) is turned on and the dog is in motion, the BEEPER message
ashes in the main navigation window on the receiver display. If the dog does not
move or is near wild pig, the BEEPER is lit continuously. In the top line of the display,
the BEEPER indicates status when the sound or vibration indication is selected for at
least one dog on the receiver.
Setting the BEEPER feature:
The indicating standing still feature must be set correctly before hunting commences.
1. Long press the MENU push button, select and confirm by pressing
and holding the MENU push button.
2. Select the transmitter (collar) for which you wish to set BEEPER. Long press the
MENU push button.
3. Select the parameter you wish to set by using / arrows and confirm by
pressing and holding the MENU push button.
4. Use the arrows / to select the required value or mode. To return to the level
above, press .
5. When the BEEPER is fully set, return to the main screen by pressing repeatedly .
WARNING: By saving the waypoint to a position where you have a paired
transmitter or other receiver, will delete the transmitter (receiver) from the
receiver's memory.
8.5 WAYPOINT – saving receiver’s position
The waypoint feature enables saving the GPS coordinates of the current receiver
(handset) location. Subsequently, you may navigate to the saved location.
Saving waypoint:
1. Hold the CODE push button on the receiver for 2 seconds.
2. Select position to which you wish to save the waypoint by / arrows. If the
position is empty (at given position there is no paired transmitter, other receiver
or saved waypoint), the message is shown on the display.
3. Hold the MENU push button for 2 seconds to show .
4. Press the push button to return to the main screen.
To navigate to the saved waypoint, select in the main navigation panel by /
arrows the saved location.
Deleting waypoint:
1. Switch off all transmitters (collars) in the receiver vicinity.
2. Hold the CODE push button on the receiver for 2 seconds.
3. Select position you wish to delete by / arrows.
4. Hold the CODE push button for 2 seconds – after approximately 20 seconds
the message is displayed.
5. Press the push button to return to the main screen.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dogtrace X30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace X30 in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info