Manual Dogtrace X30 (page 14 of 119) (English, French, Italian, Spanish)

766039

Zoom out

Zoom in

1/119

ENGLISH

1 2 3 4 5 Chapter

/ 9.1

/ 7.6

– / / 6.4

/ 7.9

/ 8.7

7.6 Pairing – encoding another receiver (hand set) with your receiver

DOG GPS X30 enables pairing of other dog handlers’ receivers with your receiver

and then track their position. Updating the position of other dog handlers in your

receiver takes place every 60 seconds.

Turn on another receiver to transmit its position before pairing your receiver with

this receiver commences.

NOTE: To delete one of the paired transmitters (collars), receivers or waypoints

from the receiver’s memory, carry out pairing without the transmitter turned on.

After approximately 20 seconds, the message appears at the given

position.

NOTE: The receiver X30/X30+ is possible to pair with X20/X20+ transmitters

(collars). It is not possible to send training commands to these collars. Some other

functions are limited.

7.5 Pairing – encoding transmitter (collar) with receiver (handset)

1. Turn on the receiver and transmitter you wish to pair together – switch other

devices o.

2. Hold the CODE push button on the receiver for 2 seconds.

3. Select the position to which you wish to pair the transmitter (collar) by using /

arrows. If the position is empty (there is no paired transmitter, receiver or saved

waypoint), the message is shown on the display.

4. Hold the CODE push button again for 2 seconds.

5. Move the transmitter close to the receiver with the RF aerials parallel to each

other.

6. After pairing, the message is displayed and to

is lit on the display (according to the selected position to which the transmitter is

paired).

7. If you wish to pair another transmitter, repeat the procedure from Point 3.

8. To exit the coding mode press .

* Setting only applies to the X30B/X30TB transmitters

** Displayed when Boar Mode is set ( )

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace X30 in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 4,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dogtrace X30 Manual

Product: