Manual Dogtrace X30 (page 11 of 119) (English, French, Italian, Spanish)

766039

Zoom out

Zoom in

1/119

ENGLISH

WARNING: More frequent updating of the dog’s position results in quicker

discharging of the transmitter battery.

Turning on:

1. Place the red target located on the bottom of the receiver to the red target on

the transmitter for approximately 1 second – the red indicator light comes on and

subsequently the green indicator light is lit.

2. After the green indicator light is lit, move the receiver away from the transmitter.

The green indicator light starts flashing.

Turning off:

Proceed in the same manner as for switching on.

1. Place the red target located on the bottom of the receiver to the red target on the

transmitter for approximately 1 second – the green indicator light comes on and

subsequently the red indicator light is lit.

2. After the red indicator light is lit, move the receiver away from the transmitter. The

transmitter stops flashing.

6.4 Frequency of position updating (transmission)

DOG GPS X30 enables selecting the updating frequency of your dog's position.

When the collar transmits its position more frequently, the location of the dog is

known more frequently.

1. Switch off the transmitter (collar).

2. Place the red target located on the bottom of the receiver to the red target on the

transmitter for 3 seconds – the transmitter starts beeping. Select the updating

frequency according to the number of beeps – see the table below.

3. Select the frequency by moving the receiver away from the transmitter when the

required number of beeps is heard.

Number of beeps 1 2 3

Updating frequency [s] 3 6 9

6.5 Selecting contact points (GPS X30T)

Stainless contact points are used for the transmission of stimulation pulses from the

transmitter to the dog's skin. Each pack contains two types. If your dog has short

hair use the short contact points, use the longer ones if you have dog with longer

or thicker hair. Screw the contact points onto the transmitter screws – see Fig. 5.1

Transmitter (collar) in the Equipment Description paragraph, Page 7. Tighten the

contact points by hand. Do not use pliers or other tools for tightening as it may cause

irreparable damage to the product.

NOTE: Frequency may also be changed remotely from the receiver or Dogtrace

GPS app. Receiver settings may be found in MENU / / – .

Options may be found in the table, Paragraph 7.4. .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace X30 in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 4,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dogtrace X30 Manual

Product: