766043

Dogtrace X30 plus Manual

17
Zoom out
Zoom in
Previous page
1/119
Next page
17
ENGLISH
WARNING: If other receivers (dog handlers) are paired with your receiver, you will
no longer be able to track them after changing the channel. These hunters would
also have to switch their receivers and transmitters to the same channel.
NOTE: Changing the transmitting channel may also be enabled by the Dogtrace
GPS app
8.1 Tracking
The transmitter (collar) and the receiver (handset) have built-in GPS receiver by
which both detect their position. The transmitter sends information about its positi-
on by means of the radio signal (RF) to the receiver, which shows the direction and
dog’s distance from the handler on the display.
8 DOG GPS X30 FEATURES
NOTE: Channel switching is only possible for X30/X30T/X30B/X30TB receivers
and transmitters (collars). If any X20 or X20+ collars are paired on the receiver, the
receiver will not enable channel switching.
7.9 Channel selection
The number of active transmitters (collars) in the vicinity is restricted. In the event
that a large number of DOG GPS transmitters are transmitting at the same time, some
dog position messages send to your receiver may be lost. To increase the number of
active transmitters in one area, set the updating frequency to 9 seconds (Paragraph
6.4). Nevertheless, if the position messages are lost, this status will be indicated on
the DOG GPS X30 receiver by the symbol next to the RF signal strength indication.
In this case, switch your transmitters (collars) and the receiver to another channel.
To change a channel, all transmitters (collars) must within close proximity – up to a
maximum of 10 meters.
1. Turn on all transmitters and the receiver on which you wish to change channel.
2. Long press the MENU push button on the receiver.
3. Select using / arrows and long press the MENU push button
again.
4. Firstly, currently selected channel is displayed; to change press / and select
reverse or .
5. Long press the MENU push button to conrm the selection. Each transmitter will
successively beep to indicate channel switching. One beep indicates switching to
the channel and two consecutive beeps to the channel .
6. If the channel is changed correctly message will show on all transmitters’
displays. If the change fails, the message will appear on the display.
Repeat the whole procedure from the step number 4.
7. By repeatedly pressing return to the receiver’s main screen.
8. Make sure that you receive RF signals from all your transmitters on your receiver.
If no, try switching the channel again to the desired receiver / .
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dogtrace X30 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace X30 plus in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info