766043
12
Zoom out
Zoom in
Previous page
1/119
Next page
12
ENGLISH
7.1 Charging the receiver
GPS transmitter includes Li-Pol battery, which must
be charged before the first use.
1. Remove dirt from charging contacts. Connect the
charging clip to the receiver (see figure).
2. Connect cable to the power adapter, which is
then plugged into the mains.
3. Display shows gradually increasing number of
horizontal bars in the battery symbol.
4. Charging takes approximately 3 hours.
5. Battery is fully charged when the battery symbol
is full – see below.
WARNING: If the collar is too loose, the transmitter is likely to move and repeated
friction may irritate your dog’s skin. Furthermore, in this case, the contact points
may not touch the skin surface in required manner and consequently, the
training module may not function correctly. We do not recommend keeping the
dog’s collar at the same place for several hours as it could cause skin irritation. If it
is necessary for your dog to wear the collar for a long time, change the position of
the transmitter on the neck regularly. If the collar with the transmitter is too tight,
it may cause pressure sores where the contact points touch the skin. If this occurs,
do not use the training module until all traces of irritation disappear.
WARNING: Charge the battery at temperatures between 0 °C to 40 °C. Use only
the original power adapter supplied by the manufacturer for charging as using
dierent one may lead to irreparable battery damage.
7 PREPARING RECEIVER HANDSET
6.6 Fitting the collar
Fit the collar with the GPS transmitter to the
dog so that the GPS and RF aerials are pointing
upwards (see gure). The collar must be
suciently tightened as not to rotate on the dog's
neck but to enable the dog to naturally breathe
and receive food. Appropriately tightened collar
is essential for accurate sensing and indication of
dog barking. If the training module (X30T/X30TB kit) is part of the transmitter, it is
essential to ensure good contact between the contact points and the dog's skin. We
recommend tting the collar on a dog at rest. If the dog has long or dense hair, it is
advisable to cut the coat at the point where contact points touch the skin or use the
longer contact points. Long-term eects caused by the collar on the dog's skin may
cause irritation. If this occurs, do not use the DOG GPS until all traces of irritation
disappear.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dogtrace X30 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace X30 plus in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info