Manual Dogtrace d-control professional 2000 One (page 9 of 20) (English)

766077

Zoom out

Zoom in

1/20

3. Command setting – by pressing down button you can choose a command

for the selected function button A1/A2/B1/B2. Selected command will be sent to

the receiver collar.

You can select following commands:

■ long discontinuous stimulation impulse

■ momentary stimulation impulse

■ vibration

■ light

■ audible beep tone

4. Mode and stimulation level setting – use buttons for impulse intensity

setting or for mode setting.

Receiver preparation

Battery charging

d-control professional receiver con-

tains the Li-Pol accumulator.

The accumulator of the unit must be

charged before using the unit for the

first time.

1. Connect the supply cable and the

clip to the receiver (see picture)

2. Connect the supply cable to the

supply adaptor, afterward plug in

the adaptor into the mains.

3. The orange LED indicator of the

receiver will lit up.

4. Charge the acumulator approxi-

mately for 2 hours.

5. The orange LED indicator will go

out when the charging is finished.

Warning: Rechargeable clip has on the upper and lower

jaw small projections, they must get into the contact with

the groove of the receiver.

Optimal temperature for charging is from 0°C up to 40 °C.

Use only original the power adaptor supplied in the

packing with the device. Other chargers could damage

the accumulator.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace d-control professional 2000 One in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dogtrace d-control professional 2000 One Manual

Product: