Manual Dogtrace d-control 200 mini (page 12 of 20) (English)

766068

Zoom out

Zoom in

1/20

How to check that your d–control works correctly

You can check anytime that your d-control is operating

correctly.

 Before doing so, make sure that the receiver is switched

o.

 Place the test discharge lamp in contact with each of the

contact points as shown in the picture.

 Switch on the transmitter and receiver.

 Press the stimulation button and modify the level of

intensity of the stimulations: the test lamp will come on

with more or less intensity according to the selected

intensity level. Location of the test lamp attachment

Using d–control training collar in winter

When using d-control in winter, please keep in mind:

 Low humidity – causes less skin conductivity. It is necessary to provide better conductivity

between the electrodes of the receiver and the dog‘s skin. This can be achieved by lubricating the

dog’s skin in the touch points of contact points with Vaseline, baby oil, hand lotion, etc.

 Heavier dog’s coat – it is necessary to tighten the collar so that the permanent contact with the

dog‘s skin is ensured. If the coat is too thick, it is recommended to choose a longer type of contact

points.

 Battery properties change – temperatures below 0 °C slow down chemical reactions in batteries.

To ensure a performance of repetitive stimulations (especially of higher levels), it is recommended

to insert a new battery into the receiver for the winter time. During the training, observe

continuously dog‘s reactions and increase the stimulation level as needed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace d-control 200 mini in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dogtrace d-control 200 mini Manual

Product: