Manual Dogtrace d-control 1600 (page 19 of 23) (English)

766054

Zoom out

Zoom in

1/23

1. Read again this user guide and make sure the problem is not caused by a at battery or

incorrect use.

2. Make sure the batteries are inserted with the correct polarity.

3. If the transmitter does not communicate with the receiver, try to program

communication - see chapter: Programming (pairing) of the transmitter and the

receiver.

4. If it seems, that the dog does not respond to the stimulation impulse:

 Check again the battery in the transmitter and in the receiver.

 Test the receiver‘s functions with a test discharge lamp (see 5th paragraph of this

chapter).

 Check whether you have choosen correct length of the contact points (see chapter:

Choosing the contact points) and ensure contact points are well tightened and in

contact with your dog‘s skin (see chapter: Fitting the collar).

 If the dog has dry skin, moisten the skin.

5. Check the correct function of the stimulation impulse.

By using test discharge lamp you can easily check correct function of the stimulation

impulse:

 Make sure that the receiver is turned OFF.

 Place the test discharge lamp in contact with each of the contact points - loosen the

contact points, insert the lamp‘s outlets under the contact points so they are in the

Troubleshooting

 Thicker fur dog – it is necessary to tighten the collar so that the permanent contact

with the dog‘s skin is ensured. If the fur is too thick, it is recommended to cut the hair or

choose a longer type of contact points.

 Battery properties change – temperatures below 0 °C slow down chemical reactions

in batteries. To ensure a performance of repetitive stimulation impulses (especially of

higher levels), it is recommended to insert a new battery into the receiver for the winter

time. During the training, observe continuously dog‘s reactions and increase the

stimulation level as needed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace d-control 1600 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dogtrace d-control 1600 Manual

Product: