508445

Dnt IP-dio Tune Manual

36
Zoom out
Zoom in
Previous page
1/104
Next page
- 36 -
English
Auto scan
To search for a FM station, you need to press and hold 2 seconds the Next >>I or Previous I<< keys, this
will start scanning UP or DOWN the frequency band. Once a station has been found, the scanning will stop
automatically. If no station is found, then the tuning will stop once it is cycled through the entire FM band
(87.5-108MHz);
Changing the volume
You can change the volume by turning the dial clockwise to increase the volume and anticlockwise to
decrease the volume. The display shows the volume bar. You cannot change the volume when you are in
a menu or when the radio is connecting to a station.
Storing a radio station in a preset by the panel control
When a radio station is playing, just hold one of the preset buttons to store the station.
E.g. To store preset 1: press and hold the preset 1, then the LCD will show “Assigned to Preset 1”
Playing a preset radio station when a radio station is playing, briefl y press the corresponding preset key,
e.g. if you saved Radio A to Preset 1, then just press the number 1 preset key. If you press a preset that
hasn’t been allocated a station, then it will display “Preset # empty”.
There is only 1 preset for the FM on the unit as the preset 2 and 3 is used for the Auto scan
function.
Storing a radio station in a preset by the front remote control
To store a preset, you must fi rst be listening to the station that you would like to save, then press STORE
button. Then press the preset number you would like to save and allow 2 seconds to store the station into
the preset. The LCD will then show <Assigned to preset #>.
Once you have saved a station to one of the presets, you can recall it by pressing RECALL button.
Then press the preset number you would like to recall and the radio will connect to your station that you
recalled.
Setting the CLOCK
You don‘t need to setup the clock, because it is automatically updated by internet for GMT+1,
which is used most countries in Europe.
If you make a mistake at any point, press BACK button to go back to the previous screen.
Rotate the dial until the display says<Confi gure>.
Press the SELECT button.
Rotate the dial until the display says<time/date>.
Press the SELECT button.
Rotate the dial until the display shows the correct hour.
Press the SELECT button.
Rotate the dial until the display shows the correct minutes.
Press the SELECT button
Using the product
IPdiotuneDEFN.indd 36IPdiotuneDEFN.indd 36 30.03.2010 11:59:0430.03.2010 11:59:04
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dnt IP-dio Tune at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dnt IP-dio Tune in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info